Kellett - release June 2026

.ddev/run-php

@@ -0,0 +1,32 @@
+#!/bin/bash
+
+# phpsab/VS Code may spawn us without the login-shell PATH, so `ddev` can be
+# missing. Recover PATH from the developer's own login shell — works on any
+# OS (macOS/Linux/WSL) regardless of where ddev is installed. Miss-path only.
+if ! command -v ddev >/dev/null 2>&1; then
+  _p=$("${SHELL:-/bin/sh}" -lic 'printf "\037%s\037" "$PATH"' 2>/dev/null)
+  _p=${_p#*$'\037'}; _p=${_p%%$'\037'*}
+  [ -n "$_p" ] && export PATH="$_p"
+fi
+
+current_dir=$(pwd)
+
+# If the $current_dir ends with "/.ddev" then we need to remove the ".ddev".
+if [[ $current_dir == */.ddev ]]; then
+  current_dir=${current_dir%/.ddev}
+fi
+
+# Loop through all the arguments and replace any part of any argument that
+# matches current_dir with /var/www/html. This is necessary because the vscode
+# extension will pass in a full path to the file on the local system, rather
+# than the path to the file inside the ddev container.
+for i in "$@"
+do
+  if [[ $i =~ $current_dir ]]; then
+    new_arg=$(echo "$i" | sed "s#$current_dir#/var/www/html#")
+    # Replace the argument in the list of arguments
+    set -- "${@/$i/$new_arg}"
+  fi
+done
+
+ddev exec php "$@"

.ddev/run-phpcbf

@@ -0,0 +1,64 @@
+#!/bin/bash
+
+# phpsab/VS Code may spawn us without the login-shell PATH, so `ddev` can be
+# missing. Recover PATH from the developer's own login shell — works on any
+# OS (macOS/Linux/WSL) regardless of where ddev is installed. Miss-path only.
+if ! command -v ddev >/dev/null 2>&1; then
+  _p=$("${SHELL:-/bin/sh}" -lic 'printf "\037%s\037" "$PATH"' 2>/dev/null)
+  _p=${_p#*$'\037'}; _p=${_p%%$'\037'*}
+  [ -n "$_p" ] && export PATH="$_p"
+fi
+
+current_dir=$(pwd)
+
+# If the $current_dir ends with "/.ddev" then we need to remove the ".ddev".
+if [[ $current_dir == */.ddev ]]; then
+  current_dir=${current_dir%/.ddev}
+fi
+
+# Loop through all the arguments and replace any part of any argument that
+# matches current_dir with /var/www/html. This is necessary because the vscode
+# extension will pass in a full path to the file on the local system, rather
+# than the path to the file inside the ddev container.
+for i in "$@"
+do
+  if [[ $i =~ $current_dir ]]; then
+    new_arg=$(echo "$i" | sed "s#$current_dir#/var/www/html#")
+    # Replace the argument in the list of arguments
+    set -- "${@/$i/$new_arg}"
+  fi
+done
+
+if [ "$#" -gt 0 ]; then
+  # Run phpcbf inside the ddev container, suppress ddev exec's error message, and capture stdout and exit code.
+  stderr_file=$(mktemp)
+  output=$(ddev exec vendor/bin/phpcbf "$@" 2> "$stderr_file")
+  exit_code=$?
+
+  phpcbf_exit_code=0
+  # Check if the command failed and capture the exit code.
+  if [ $exit_code -ne 0 ]; then
+    # If the command failed, get the exit code from the stderr file.
+    phpcbf_exit_code=$(grep -m 1 "exit status" "$stderr_file" | sed -E 's/.*exit status ([0-9]+).*/\1/')
+    # If the exit code is not found, set it to 1 (indicating an error).
+    if [ -z "$phpcbf_exit_code" ]; then
+      phpcbf_exit_code=1
+    fi
+  fi
+
+  # Output the JSON result from phpcbf (stdout).
+  echo "$output"
+
+  # Dump out the output from stderr for debugging.
+  # This is useful for debugging, but you may want to comment it out in production.
+  # echo "stderr output: $(cat "$stderr_file")"
+  # echo "phpcbf exit code: $phpcbf_exit_code"
+  # Clean up the temporary file.
+  rm -f "$stderr_file"
+
+  # Pass the correct exit code from phpcbf back to the caller.
+  exit $phpcbf_exit_code
+else
+  echo "No arguments provided for phpcbf."
+  exit 1
+fi

.ddev/run-phpcs

@@ -0,0 +1,64 @@
+#!/bin/bash
+
+# phpsab/VS Code may spawn us without the login-shell PATH, so `ddev` can be
+# missing. Recover PATH from the developer's own login shell — works on any
+# OS (macOS/Linux/WSL) regardless of where ddev is installed. Miss-path only.
+if ! command -v ddev >/dev/null 2>&1; then
+  _p=$("${SHELL:-/bin/sh}" -lic 'printf "\037%s\037" "$PATH"' 2>/dev/null)
+  _p=${_p#*$'\037'}; _p=${_p%%$'\037'*}
+  [ -n "$_p" ] && export PATH="$_p"
+fi
+
+current_dir=$(pwd)
+
+# If the $current_dir ends with "/.ddev" then we need to remove the ".ddev".
+if [[ $current_dir == */.ddev ]]; then
+  current_dir=${current_dir%/.ddev}
+fi
+
+# Loop through all the arguments and replace any part of any argument that
+# matches current_dir with /var/www/html. This is necessary because the vscode
+# extension will pass in a full path to the file on the local system, rather
+# than the path to the file inside the ddev container.
+for i in "$@"
+do
+  if [[ $i =~ $current_dir ]]; then
+    new_arg=$(echo "$i" | sed "s#$current_dir#/var/www/html#")
+    # Replace the argument in the list of arguments
+    set -- "${@/$i/$new_arg}"
+  fi
+done
+
+if [ "$#" -gt 0 ]; then
+  # Run phpcs inside the ddev container, suppress ddev exec's error message, and capture stdout and exit code.
+  stderr_file=$(mktemp)
+  output=$(ddev exec vendor/bin/phpcs "$@" 2> "$stderr_file")
+  exit_code=$?
+
+  phpcs_exit_code=0
+  # Check if the command failed and capture the exit code.
+  if [ $exit_code -ne 0 ]; then
+    # If the command failed, get the exit code from the stderr file.
+    phpcs_exit_code=$(grep -m 1 "exit status" "$stderr_file" | sed -E 's/.*exit status ([0-9]+).*/\1/')
+    # If the exit code is not found, set it to 1 (indicating an error).
+    if [ -z "$phpcs_exit_code" ]; then
+      phpcs_exit_code=1
+    fi
+  fi
+
+  # Output the JSON result from phpcs (stdout).
+  echo "$output"
+
+  # Dump out the output from stderr for debugging.
+  # This is useful for debugging, but you may want to comment it out in production.
+  # echo "stderr output: $(cat "$stderr_file")"
+  # echo "phpcs exit code: $phpcs_exit_code"
+  # Clean up the temporary file.
+  rm -f "$stderr_file"
+
+  # Pass the correct exit code from phpcs back to the caller.
+  exit $phpcs_exit_code
+else
+  echo "No arguments provided for phpcs."
+  exit 1
+fi

.gitignore

@@ -26,13 +26,13 @@ docroot/profiles/contrib
 docroot/libraries
 drush/Commands
 
-# Ignore custom theme build artifacts
+# Ignore custom theme tooling, but track compiled dist assets (deployed via git).
 docroot/themes/custom/*/node_modules
 docroot/themes/custom/*/styleguide
-docroot/themes/custom/*/patterns/*/*/css
 docroot/themes/custom/*/css
-docroot/themes/custom/**/dist
-dist/
+# Build cruft we don't deploy, even inside tracked dist/.
+docroot/themes/custom/**/*.map
+docroot/themes/custom/**/maps/
 
 # Ignore build artifacts
 deployment_identifier

LocalSetup.md

@@ -22,10 +22,6 @@ To use composer and drush within the container (recommended):
 
 ## Local Dev Environment Setup
 
-### Pantheon access
-
-This setup uses Drush to synchronize DB, make sure you have access to the Yukon D10 Pantheon site.
-
 ### Install Docksal
 
 This setup uses docksal, ensure docksal is installed on you development machine. You can find instructions in https://docksal.io/installation
@@ -63,7 +59,7 @@ Installs front end dependencies using yarn.
 
 Compiles SCSS and JS using gulp.
 
-Downloads and imports database from Pantheon.
+Downloads and imports database.
 
 And finally opens the application in web browser.
 

README.md

@@ -1,6 +1,6 @@
 # Yukon.ca
 
-Drupal 10 Drupal build for Yukon.ca. This repository was prepared so it's sources can be built via CI to deploy to Pantheon.
+Drupal 10 Drupal build for Yukon.ca.
 
 [[_TOC_]]
 
@@ -23,9 +23,9 @@ Layout Builder: The current standard choice for components implementation is Lay
 
 ## Development workflow
 
-Every new development should be pushed to a development branch. The advice is to keep the names short: due to Pantheon's limitation, multidev cannot use longer branch names, so in case we want to use it, we should avoid the long names.
+Every new development should be pushed to a development branch.
 
-Upon pushing to a branch, you can create a Pull Request for EW to review. Branches are pushed to Pantheon so you can also spin a Multidev environment to demonstrate before merging.
+Upon pushing to a branch, you can create a Pull Request for EW to review.
 
 ## Resources
 
@@ -109,29 +109,17 @@ npm run build
 ```bash
 drush locale-export fr --type=customized > config/translations/fr.customized.po
 ```
-- Pantheon
-```bash
-drush locale-export fr --type=customized > /code/config/translations/fr.customized.po
-```
 
 ##### Import:
 - Local
 ```bash
 drush locale-import fr --type=customized /var/www/html/config/translations/fr.customized.po
 ```
-- Pantheon
-```bash
-drush locale-import fr --type=customized /code/config/translations/fr.customized.po
-```
 
 ##### Import with override:
 - Local
 ```bash
 drush locale-import fr --type=customized --override=customized /var/www/html/config/translations/fr.customized.po
 ```
-- Pantheon
-```bash
-drush locale-import fr --type=customized --override=customized /code/config/translations/fr.customized.po
-```
 
 

composer.json

@@ -120,10 +120,8 @@
         "enshrined/svg-sanitize": "^0.22.0",
         "evolvingweb/blinker_addons": "^2.4",
         "evolvingweb/blinker_core": "^2.0",
-        "evolvingweb/drupal-ci": "^2.0",
         "evolvingweb/glider": "^3.6",
         "oomphinc/composer-installers-extender": "^2.0",
-        "pantheon-systems/drupal-integrations": "^10.0",
         "wikimedia/composer-merge-plugin": "^2.1"
     },
     "extra": {
@@ -198,7 +196,6 @@
             "locations": {
                 "web-root": "./docroot"
             },
-            "allowed-packages": ["pantheon-systems/drupal-integrations", "evolvingweb/drupal-ci"],
             "file-mapping": {
                 "[web-root]/sites/default/default.services.yml": {
                     "mode": "replace",