gr-satnogs: SatNOGS GNU Radio Out-Of-Tree Module

gr-satnogs is an out-of-tree GNU Radio module that provides all the necessary tools for decoding signals from various scientific and academic satellites. It also provides blocks for debugging and experimenting with known satellite telecommunication schemes. Pre-built packages for gr-satnogs are available for some distributions at open SUSE build service: librespace:satnogs.

Installation

Requirements

• GNU Radio ( >= 3.10.0 )
• CMake ( >= 3.8)
• G++ (> 7.0)
• Boost
• VOLK
• libogg
• libvorbis
• libpng
• libpng++
• nlohmann-json (>= 3.0)
• git

Debian / Ubuntu

To install GNU Radio 3.10 on Ubuntu based distributions that do not have already an available package:

 sudo add-apt-repository ppa:gnuradio/gnuradio-releases
 sudo apt-get update

For Debian you can use the the stable repository available from Open Build Service. For latest experimental software you can use the unstable repository.

Installation from source

To install from source you need to download extra packages depending on your distribution and then build the gr-satnogs module. Instruction for Debian/Ubuntu and OpenSUSE Tumbleweed are provided below.

Debian / Ubuntu

Install the following packages:

sudo apt install -y \
      git \
      cmake \
      gnuradio-dev \
      libitpp-dev \
      libvorbis-dev \
      libhamlib++-dev \
      libpng++-dev \
      nlohmann-json3-dev \
      python3-hamlib

openSUSE Tumbleweed

The itpp library package is not available to openSUSE Tumbleweed by default but you can add a third party repository with:

sudo zypper addrepo -cf https://download.opensuse.org/repositories/hardware:/sdr/openSUSE_Tumbleweed/ hardware:sdr
sudo zypper ref

Install the following packages:

sudo zypper in -y \
      git
      gcc-c++ \
      cmake \
      gnuradio-devel \
      libboost_date_time-devel \ 
      libboost_program_options-devel \
      libboost_system-devel \
      libboost_regex-devel \
      libboost_thread-devel \
      libboost_test-devel \
      itpp-devel \
      libvorbis-devel \
      hamlib-devel \
      png++-devel \ 
      nlohmann_json-devel \
      python311-pybind11-devel \
      python311-numpy-devel \
      python3-Hamlib

If this is the first time you are building the gr-satnogs module run

sudo ldconfig

After you have installed the necessary packages download the source code and build it with the following commands:

git clone https://gitlab.com/librespacefoundation/satnogs/gr-satnogs.git
cd gr-satnogs
git submodule update --init --recursive
mkdir build
cd build
cmake ..
make -j $(nproc --all)
sudo make install

Advanced

By default, the SatNOGS module will use the default installation prefix. This highly depends on the Linux distribution. You can use the CMAKE_INSTALL_PREFIX variable to alter the default installation path. E.g:

cmake -DCMAKE_INSTALL_PREFIX=/usr ..

Also, by default the build system enables a set of blocks used for debugging during the development. The enable/disable switch is controlled through the INCLUDE_DEBUG_BLOCKS boolean variable. If for example, you want to disable the debugging blocks, the CMake command would be:

cmake -DINCLUDE_DEBUG_BLOCKS=OFF ..

Another common control option is the library suffix of the Linux distribution. There are distributions like Fedora, openSUSE, e.t.c that the their 64-bit version use the lib64 folder to store the 64-bit versions of their dynamic libraries. On the other hand, distributions like Ubuntu do the exact opposite. They use lib directory for the libraries of the native architecture and place the 32-bit versions on the lib32 directory. In any case the correct library directory suffix can be specified with the LIB_SUFFIX variable. For example (and in case you're using openSuSE Tumbleweed):

cmake -DLIB_SUFFIX=64 -DCMAKE_INSTALL_PREFIX=/usr -DINCLUDE_DEBUG_BLOCKS=OFF ..

will install the libraries at the /usr/lib64 directory.

Development Guide

The development is performed on the master branch. For special cases where a team of developers should work an a common feature, maintainers may add a special branch on the repository. However, it will be removed at the time it will be merged on the master branch. All developers should derive the master branch for their feature branches and merge requests should also issued at this branch. Developers should ensure that do not alter the CMake version tags in any way. It is a responsibility of the maintainers team.

Before submitting a new merge request, rebase the master branch and confirm that the automated CI tests have successfully completed for all platforms mandated by the .gitlab-ci.yml recipe. Make sure also that you sign your work following the rules described in the CONTRIBUTING.md.

Coding style

For the C++ code, gr-satnogs uses a slightly modified version of the Stroustrup style, which is a nicer adaptation of the well known K&R style. In addition, we decided to decrease the indentation from 4 to 2 spaces. This choice was made mainly to avoid breaking statements with long namespaces. We also found ourselves, that with smaller indentation we use more descriptive variable names, avoiding frustrating abbreviations without phoenixes etc.

At the root directory of the project there is the clang-format options file .clang-format containing the proper configuration. Developers can import this configuration to their favorite editor. In addition the hooks/pre-commit file contains a Git hook, that can be used to perform before every commit, code style formatting with clang-format and the .clang-format parameters. To enable this hook developers should copy the hook at their .git/hooks directory. Failing to comply with the coding style described by the .clang-format will result to failure of the automated tests running on our CI services. So make sure that you either import on your editor the coding style rules or use the pre-commit Git hook.

Regarding the naming of files and variables, we use the underscore naming convention (do_this) instead of camel cases (DoNotDoThis). Exception to this rule is the CMake module filenames. In addition, all private variables of a C++ class, should start with the prefix d_ allowing the developers to spot easily private members of the object.

Adding a new Satellite Decoder

With the new architecture, adding a new satellite has become an easy and straight forward task. The decoders are implemented using the following approach.

There is a generic block called frame_decoder. This block should not be altered at any case. If you find yourself in a situation that you need to apply modifications on this block, raise an issue on the issue tracker The frame_decoder block accepts two parameters. A satnogs::decoder object and the item size of the input stream. Internally, the frame_decoder invokes the decode() method of the satnogs::decoder class.

The satnogs::decoder class, is a virtual class providing a generic API that every derived decoder class should implement. The core of this class is the

decoder_status_t
decode(const void *in, int len)

method. This method accepts an input buffer in. The type of the items depends on the implementation. It also takes the len argument specifying the number of items available in the in buffer. The method returns a decoder_status_t class object.

class decoder_status
{
public:
  int                   consumed;
  bool                  decode_success;
  pmt::pmt_t            data;

  decoder_status () :
    consumed(0),
    decode_success(false),
    data(pmt::make_dict())
  {
  }
};

typedef class decoder_status decoder_status_t;

The class contains three fields that allow the frame_decoder block to operate continuously, without any further assistance. It is responsibility of the derived decoder class to properly set the values to these fields.

• The consumed class should contain the number of items consumed during the decode() method invocation. It is ok to consume 0, less than len or len items but not more.
• decode_success should be set to true only if a frame was successfully decoded and its data are available on the data field.
• data field is a pmt::pmt_t dictionary containing the decoded data and other information regarding it, using the gr-satnogs metadata format. More about them in the Metadata section

Adding a new Satellite Flowgraph

In most cases, a satellite decoder needs also a GNU Radio flowgraph with the necessary blocks that will process the input signal before passing it to the decoder (e.g. filtering, clock recovery, etc). We maintain these flowgraphs inside a separate repository called satnogs-flowgraphs. Please follow the development guide of this repository to submit your flowgraphs.

Metadata

Each decoder generates a pmt::pmt_t dictionary containing the decoded data and other information regarding the decoded frame. The gr::satnogs::metadata class provides a set of commonly used metadata keys. The table below describes some of them:

Key	Description
pdu	This string field contains the decoded data in base64 form
time	The time at which the frame was received. Time is represented in an ISO 8601 string with microsecond accuracy
crc_valid	Boolean indicating if the CRC check has been successfully passed
freq_offset	Float value indicating the frequency offset observed
corrected_bits	uint64_t with the number of corrected bits
symbol_erasures	uint64_t with the number of erased symbols
sample_start	uint64_t with the sample index at which the decoder identified the start of the frame
sample_cnt	uint64_t with the number of samples of a valid frame. sample_start + sample_cnt specify the sample index at the end of the frame
snr	float with the estimated SNR in dB

The method Json::Value metadata::to_json(const pmt::pmt_t& m) is converts the dictionary m into a valid JSON object. There is also the std::string metadata::keys() static method which returns a list with the available metadata keys. This method is also available in Python through the Swig interface. For example:

$ python
>>> import satnogs
>>> satnogs.metadata.keys()
'[pdu, crc_valid, freq_offset, corrected_bits, time, sample_start, sample_cnt, symbol_erasures]'
>>>

Using the json_converter block, developers can convert a pmt::pmt_t dictionary of a decoder into a pmt::pmt_t blob, containing the raw bytes of the JSON string, which then can be passed to a UDP sink targeting the satnogs-client. The json_converter block accepts also a string that may be used to inject an arbitrary number of additional information under the extra JSON field. Of course, this string should be in a JSON valid format.

For example, such a JSON string with information on the extra field could be like

{
    "corrected_bits" : 0,
    "extra" :
    {
        "x" : 3,
        "y" : "test"
    },
    "pdu" : "igAg7nRAOCAniUMAtIoAAAAAAAAAAAAAAABNJ4kfAFD4wwAfAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==",
    "symbol_erasures" : 0,
    "time" : "2019-09-11T15:39:13.514138Z"
}

Release Policy

The gr-satnogs OOT module uses the GNU Radio style major.api.minor.patch versioning scheme.

• Patches, bug fixes that do not add any new features nor affect in anyway satnogs-flowgraphs advance the patch version.
• Improvements and new features that do not break backwards compatibility with satnogs-flowgraphs advance the minor version.
• The api indicates changes that require modifications on satnogs-flowgraphs and break backwards compatibility.
• major version advances when the are huge changes on the entire codebase which. Such changes break backwards compatibility with satnogs-flowgraphs.

For every release change a tag with the corresponding version is created. Releases can be retrieved by the tags page.

Website and Contact

For more information about SatNOGS please visit our site and our community forums. You can also chat with the SatNOGS community at https://riot.im/app/#/room/#satnogs:matrix.org, or on IRC at #satnogs on Freenode. For chatting around the development and for watching the changes in project's gitlab repositories, join in https://riot.im/app/#/room/#satnogs-dev:matrix.org or the IRC channel #satnogs-dev on Freenode.

License

© 2016-2019 Libre Space Foundation.

Licensed under the GPLv3.