add SPI driver for semtech sx128x chips

sx128x/README.md

@@ -0,0 +1,7 @@
+# SX128x Radio
+Radio from Semtech in the 2.4 GHz band. This driver uses SPI to communicate with the radio instead of the alternative UART interface.
+
+## Supported Chips
+- [SX1280](https://www.semtech.com/products/wireless-rf/lora-connect/sx1280)
+- [SX1281](https://www.semtech.com/products/wireless-rf/lora-connect/sx1281) 
+

sx128x/registers.go

@@ -0,0 +1,244 @@
+package sx128x
+
+const (
+	// SX128X SPI commands
+	CMD_NOP = uint8(0x00)
+
+	CMD_SET_UART_SPEED = uint8(0x9D)
+	CMD_GET_STATUS     = uint8(0xC0)
+
+	// Register Access Operations
+	CMD_WRITE_REGISTER = uint8(0x18)
+	CMD_READ_REGISTER  = uint8(0x19)
+
+	// Data Buffer Operations
+	CMD_WRITE_BUFFER = uint8(0x1A)
+	CMD_READ_BUFFER  = uint8(0x1B)
+
+	// Radio Operation Modes
+	CMD_SET_SLEEP                  = uint8(0x84)
+	CMD_SET_STANDBY                = uint8(0x80)
+	CMD_SET_FS                     = uint8(0xC1)
+	CMD_SET_TX                     = uint8(0x83)
+	CMD_SET_RX                     = uint8(0x82)
+	CMD_SET_RX_DUTY_CYCLE          = uint8(0x94)
+	CMD_SET_LONG_PREAMBLE          = uint8(0x9B)
+	CMD_SET_CAD                    = uint8(0xC5)
+	CMD_SET_TX_CONTINUOUS_WAVE     = uint8(0xD1)
+	CMD_SET_TX_CONTINUOUS_PREAMBLE = uint8(0xD2)
+	CMD_SET_AUTO_TX                = uint8(0x98)
+	CMD_SET_AUTO_FS                = uint8(0x9E)
+
+	// Radio Configuration
+	CMD_SET_PACKET_TYPE         = uint8(0x8A)
+	CMD_GET_PACKET_TYPE         = uint8(0x03)
+	CMD_SET_RF_FREQUENCY        = uint8(0x86)
+	CMD_SET_TX_PARAMS           = uint8(0x8E)
+	CMD_SET_CAD_PARAMS          = uint8(0x88)
+	CMD_SET_BUFFER_BASE_ADDRESS = uint8(0x8F)
+	CMD_SET_MODULATION_PARAMS   = uint8(0x8B)
+	CMD_SET_PACKET_PARAMS       = uint8(0x8C)
+
+	// Communication Status Information
+	CMD_GET_RX_BUFFER_STATUS = uint8(0x17)
+	CMD_GET_PACKET_STATUS    = uint8(0x1D)
+	CMD_GET_RSSI_INST        = uint8(0x1F)
+
+	// IRQ Handling
+	CMD_SET_DIO_IRQ_PARAMS = uint8(0x8D)
+	CMD_GET_IRQ_STATUS     = uint8(0x15)
+	CMD_CLEAR_IRQ_STATUS   = uint8(0x97)
+
+	// Miscellaneous
+	CMD_SET_REGULATOR_MODE = uint8(0x96)
+	CMD_SET_SAVE_CONTEXT   = uint8(0xD5)
+
+	// GetStatus
+	CIRCUIT_MODE_MASK       = uint8(0b11100000)
+	CIRCUIT_MODE_STDBY_RC   = uint8(0x2)
+	CIRCUIT_MODE_STDBY_XOSC = uint8(0x3)
+	CIRCUIT_MODE_FS         = uint8(0x4)
+	CIRCUIT_MODE_RX         = uint8(0x5)
+	CIRCUIT_MODE_TX         = uint8(0x6)
+
+	COMMAND_STATUS_MASK             = uint8(0b00011100)
+	COMMAND_STATUS_SUCCESS          = uint8(0x1)
+	COMMAND_STATUS_DATA_AVAILABLE   = uint8(0x2)
+	COMMAND_STATUS_TIMEOUT          = uint8(0x3)
+	COMMAND_STATUS_PROCESSING_ERROR = uint8(0x4)
+	COMMAND_STATUS_EXECUTION_ERROR  = uint8(0x5)
+	COMMAND_STATUS_TX_DONE          = uint8(0x6)
+
+	// SleepConfig
+	SLEEP_DATA_BUFFER_RETAIN = uint8(2)
+	SLEEP_DATA_RAM_RETAIN    = uint8(1)
+
+	// StandbyConfig
+	STANDBY_RC   = uint8(0)
+	STANDBY_XOSC = uint8(1)
+
+	// PeriodBase
+	PERIOD_BASE_15_625_US = uint8(0)
+	PERIOD_BASE_62_5_US   = uint8(1)
+	PERIOD_BASE_1_MS      = uint8(2)
+	PERIOD_BASE_4_MS      = uint8(3)
+
+	RX_CONTINUOUS_MODE = uint16(0xFFFF)
+
+	// LongPreamble
+	LONG_PREAMBLE_ENABLE  = uint8(1)
+	LONG_PREAMBLE_DISABLE = uint8(0)
+
+	// AutoFs
+	AUTO_FS_ENABLE  = uint8(1)
+	AUTO_FS_DISABLE = uint8(0)
+
+	// PacketType
+	PACKET_TYPE_GFSK    = uint8(0x00) // default
+	PACKET_TYPE_LORA    = uint8(0x01)
+	PACKET_TYPE_RANGING = uint8(0x02)
+	PACKET_TYPE_FLRC    = uint8(0x03)
+	PACKET_TYPE_BLE     = uint8(0x04)
+
+	// RampTime
+	RADIO_RAMP_02_US = uint8(0x00)
+	RADIO_RAMP_04_US = uint8(0x20)
+	RADIO_RAMP_06_US = uint8(0x40)
+	RADIO_RAMP_08_US = uint8(0x60)
+	RADIO_RAMP_10_US = uint8(0x80)
+	RADIO_RAMP_12_US = uint8(0xA0)
+	RADIO_RAMP_16_US = uint8(0xC0)
+	RADIO_RAMP_20_US = uint8(0xE0)
+
+	// CadSymbolNum
+	LORA_CAD_01_SYMBOL  = uint8(0x00)
+	LORA_CAD_02_SYMBOLS = uint8(0x20)
+	LORA_CAD_04_SYMBOLS = uint8(0x40)
+	LORA_CAD_08_SYMBOLS = uint8(0x60)
+	LORA_CAD_16_SYMBOLS = uint8(0x80)
+
+	// SpreadingFactor
+	LORA_SF_5  = uint8(0x50)
+	LORA_SF_6  = uint8(0x60)
+	LORA_SF_7  = uint8(0x70)
+	LORA_SF_8  = uint8(0x80)
+	LORA_SF_9  = uint8(0x90)
+	LORA_SF_10 = uint8(0xA0)
+	LORA_SF_11 = uint8(0xB0)
+	LORA_SF_12 = uint8(0xC0)
+
+	// Bandwidth
+	LORA_BW_1600 = uint8(0x0A)
+	LORA_BW_800  = uint8(0x18)
+	LORA_BW_400  = uint8(0x26)
+	LORA_BW_200  = uint8(0x34)
+
+	// CodingRate
+	LORA_CR_4_5    = uint8(0x01)
+	LORA_CR_4_6    = uint8(0x02)
+	LORA_CR_4_7    = uint8(0x03)
+	LORA_CR_4_8    = uint8(0x04)
+	LORA_CR_LI_4_5 = uint8(0x05)
+	LORA_CR_LI_4_6 = uint8(0x06)
+	LORA_CR_LI_4_8 = uint8(0x07)
+
+	// LoraPacketParams
+	LORA_EXPLICIT_HEADER = uint8(0x00)
+	LORA_IMPLICIT_HEADER = uint8(0x80)
+
+	LORA_CRC_ENABLE  = uint8(0x20)
+	LORA_CRC_DISABLE = uint8(0x00)
+
+	LORA_IQ_INVERTED = uint8(0x00)
+	LORA_IQ_STD      = uint8(0x40)
+
+	// RegulatorMode
+	REGULATOR_LDO   = uint8(0)
+	REGULATOR_DC_DC = uint8(1)
+
+	// IRQ masks
+	IRQ_ALL_MASK                            = uint16(0xFFFF)
+	IRQ_NONE_MASK                           = uint16(0x0000)
+	IRQ_TX_DONE_MASK                        = uint16(0b0000000000000001)
+	IRQ_RX_DONE_MASK                        = uint16(0b0000000000000010)
+	IRQ_SYNC_WORD_VALID_MASK                = uint16(0b0000000000000100)
+	IRQ_SYNC_WORD_ERROR_MASK                = uint16(0b0000000000001000)
+	IRQ_HEADER_VALID_MASK                   = uint16(0b0000000000010000)
+	IRQ_HEADER_ERROR_MASK                   = uint16(0b0000000000100000)
+	IRQ_CRC_ERROR_MASK                      = uint16(0b0000000001000000)
+	IRQ_RANGING_SLAVE_RESPONSE_DONE_MASK    = uint16(0b0000000010000000)
+	IRQ_RANGING_SLAVE_RESPONSE_DISCARD_MASK = uint16(0b0000000100000000)
+	IRQ_RANGING_MASTER_RESULT_VALID_MASK    = uint16(0b0000001000000000)
+	IRQ_RANGING_MASTER_TIMEOUT_MASK         = uint16(0b0000010000000000)
+	IRQ_RANGING_SLAVE_REQUEST_VALID_MASK    = uint16(0b0000100000000000)
+	IRQ_CAD_DONE_MASK                       = uint16(0b0001000000000000)
+	IRQ_CAD_DETECTED_MASK                   = uint16(0b0010000000000000)
+	IRQ_RX_TX_TIMEOUT_MASK                  = uint16(0b0100000000000000)
+	IRQ_PREAMBLE_DETECTED_MASK              = uint16(0b1000000000000000)
+	IRQ_ADVANCED_RANGING_DONE_MASK          = uint16(0b1000000000000000)
+
+	// SX128X register map
+	REG_FIRMWARE_VERSIONS              = uint16(0x153)
+	REG_RX_GAIN                        = uint16(0x891)
+	REG_MANUAL_GAIN_SETTING            = uint16(0x895)
+	REG_LNA_GAIN_VALUE                 = uint16(0x89E)
+	REG_LNA_GAIN_CONTROL               = uint16(0x89F)
+	REG_SYNCH_PEAK_ATTENUATION         = uint16(0x8C2)
+	REG_PAYLOAD_LENGTH                 = uint16(0x901)
+	REG_LORA_HEADER_MODE               = uint16(0x903)
+	REG_RANGING_REQUEST_ADDRESS_BYTE_3 = uint16(0x912)
+	REG_RANGING_REQUEST_ADDRESS_BYTE_2 = uint16(0x913)
+	REG_RANGING_REQUEST_ADDRESS_BYTE_1 = uint16(0x914)
+	REG_RANGING_REQUEST_ADDRESS_BYTE_0 = uint16(0x915)
+	REG_RANGING_DEVICE_ADDRESS_BYTE_3  = uint16(0x916)
+	REG_RANGING_DEVICE_ADDRESS_BYTE_2  = uint16(0x917)
+	REG_RANGING_DEVICE_ADDRESS_BYTE_1  = uint16(0x918)
+	REG_RANGING_DEVICE_ADDRESS_BYTE_0  = uint16(0x919)
+	REG_RANGING_FILTER_WINDOW_SIZE     = uint16(0x91E)
+	REG_RESET_RANGING_FILTER           = uint16(0x923)
+	REG_RANGING_RESULT_MUX             = uint16(0x924)
+	REG_SF_ADDITIONAL_CONFIGURATION    = uint16(0x925)
+	REG_RANGING_CALIBRATION_BYTE_2     = uint16(0x92B)
+	REG_RANGING_CALIBRATION_BYTE_1     = uint16(0x92C)
+	REG_RANGING_CALIBRATION_BYTE_0     = uint16(0x92D)
+	REG_RANGING_ID_CHECK_LENGTH        = uint16(0x931)
+	REG_FREQUENCY_ERROR_CORRECTION     = uint16(0x93C)
+	REG_CAD_DETECT_PEAK                = uint16(0x942)
+	REG_LORA_SYNC_WORD_MSB             = uint16(0x944)
+	REG_LORA_SYNC_WORD_LSB             = uint16(0x945)
+	REG_HEADER_CRC                     = uint16(0x954)
+	REG_CODING_RATE                    = uint16(0x950)
+	REG_FEI_BYTE_2                     = uint16(0x954)
+	REG_FEI_BYTE_1                     = uint16(0x955)
+	REG_FEI_BYTE_0                     = uint16(0x956)
+	REG_RANGING_RESULT_BYTE_2          = uint16(0x961)
+	REG_RANGING_RESULT_BYTE_1          = uint16(0x962)
+	REG_RANGING_RESULT_BYTE_0          = uint16(0x963)
+	REG_RANGING_RSSI                   = uint16(0x964)
+	REG_FREEZE_RANGING_RESULT          = uint16(0x97F)
+	REG_PACKET_PREAMBLE_SETTINGS       = uint16(0x9C1)
+	REG_WHITENING_INITIAL_VALUE        = uint16(0x9C5)
+	REG_CRC_POLYNOMIAL_DEFINITION_MSB  = uint16(0x9C6)
+	REG_CRC_POLYNOMIAL_DEFINITION_LSB  = uint16(0x9C7)
+	REG_CRC_POLYNOMIAL_SEED_BYTE_2     = uint16(0x9C7)
+	REG_CRC_POLYNOMIAL_SEED_BYTE_1     = uint16(0x9C8)
+	REG_CRC_POLYNOMIAL_SEED_BYTE_0     = uint16(0x9C9)
+	REG_CRC_MSB_INITIAL_VALUE          = uint16(0x9C8)
+	REG_CRC_LSB_INITIAL_VALUE          = uint16(0x9C9)
+	REG_SYNC_ADDRESS_CONTROL           = uint16(0x9CD)
+	REG_SYNC_ADDRESS_1_BYTE_4          = uint16(0x9CE)
+	REG_SYNC_ADDRESS_1_BYTE_3          = uint16(0x9CF)
+	REG_SYNC_ADDRESS_1_BYTE_2          = uint16(0x9D0)
+	REG_SYNC_ADDRESS_1_BYTE_1          = uint16(0x9D1)
+	REG_SYNC_ADDRESS_1_BYTE_0          = uint16(0x9D2)
+	REG_SYNC_ADDRESS_2_BYTE_4          = uint16(0x9D3)
+	REG_SYNC_ADDRESS_2_BYTE_3          = uint16(0x9D4)
+	REG_SYNC_ADDRESS_2_BYTE_2          = uint16(0x9D5)
+	REG_SYNC_ADDRESS_2_BYTE_1          = uint16(0x9D6)
+	REG_SYNC_ADDRESS_2_BYTE_0          = uint16(0x9D7)
+	REG_SYNC_ADDRESS_3_BYTE_4          = uint16(0x9D8)
+	REG_SYNC_ADDRESS_3_BYTE_3          = uint16(0x9D9)
+	REG_SYNC_ADDRESS_3_BYTE_2          = uint16(0x9DA)
+	REG_SYNC_ADDRESS_3_BYTE_1          = uint16(0x9DB)
+	REG_SYNC_ADDRESS_3_BYTE_0          = uint16(0x9DC)
+)