Skip to content

sys/threads: assert on uninitialized mutex/cond handles#489

Open
xvuko wants to merge 1 commit into
masterfrom
xvuko/assert-handle
Open

sys/threads: assert on uninitialized mutex/cond handles#489
xvuko wants to merge 1 commit into
masterfrom
xvuko/assert-handle

sys/threads: assert on uninitialized mutex/cond handles

460afc1
Select commit
Loading
Failed to load commit list.
Sign in for the full log view
GitHub Actions / Unit Test Results failed Jun 25, 2026 in 0s

106 fail, 546 skipped, 8 350 pass in 50m 36s

9 002 tests  +226   8 350 ✅ +240   50m 36s ⏱️ - 10m 10s
  680 suites + 10     546 💤 ±  0 
    1 files   ±  0     106 ❌  -  14 

Results for commit 460afc1. ± Comparison against earlier commit 41a8cb7.

Annotations

Check warning on line 0 in phoenix-rtos-tests/cpp/hello-cpp

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/cpp/hello-cpp (phoenix-rtos-tests/cpp/hello-cpp) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'hellocpp'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/initfini/main

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/initfini/main (phoenix-rtos-tests/initfini/main) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-initfini'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/ioctl/test-ioctl

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/ioctl/test-ioctl (phoenix-rtos-tests/ioctl/test-ioctl) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-ioctl'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/ioctl/test-ioctl-nested

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/ioctl/test-ioctl-nested (phoenix-rtos-tests/ioctl/test-ioctl-nested) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-ioctl-nested'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/ioctl/test-route

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/ioctl/test-route (phoenix-rtos-tests/ioctl/test-route) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: a139fa2
hal: Cortex-M i.MX RT106x
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/uart: Initializing uart(0.2)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Initialized flexspi1
dev/flash/nor: Probing flash id 0x00000000 on port 1.0
dev/flash: Initialized flexspi2
dev/flash/nor: Probing flash id 0x001640ef on port 2.0
dev/flash/nor: Configured Winbond W25Q32 4MB nor flash(2.1)
dev/pipe: Initialized rtt channel(8.0)
cmd: Executing pre-init script
console: Setting console to 0.0
alias: Setting relative base address to 0x00012000

                                 
Waiting for input,  1900 [ms]
                                 
Waiting for input,  1800 [ms]
                                 
Waiting for input,  1700 [ms]
                                 
Waiting for input,  1600 [ms]
                                 
Waiting for input,  1500 [ms]
                                 
Waiting for input,  1400 [ms]
                                 
Waiting for input,  1300 [ms]
                                 
Waiting for input,  1200 [ms]
                                 
Waiting for input,  1100 [ms]
                                 
Waiting for input,  1000 [ms]
                                 
Waiting for input,   900 [ms]
                                 
Waiting for input,   800 [ms]
                                 
Waiting for input,   700 [ms]
                                 
Waiting for input,   600 [ms]
                                 
Waiting for input,   500 [ms]
                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libalgo/unit

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libalgo/unit (phoenix-rtos-tests/libalgo/unit) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libalgo'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/printf

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/printf (phoenix-rtos-tests/libc/printf) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-printf'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/scanf-basic

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/scanf-basic (phoenix-rtos-tests/libc/scanf-basic) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-scanf-basic'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/scanf-advanced

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/scanf-advanced (phoenix-rtos-tests/libc/scanf-advanced) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-scanf-advanced
'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/pthread

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/pthread (phoenix-rtos-tests/libc/pthread) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-pthread'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/misc

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/misc (phoenix-rtos-tests/libc/misc) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-misc'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/stdio

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/stdio (phoenix-rtos-tests/libc/stdio) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-stdio'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/posixsrv

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/posixsrv (phoenix-rtos-tests/libc/posixsrv) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-posixsrv'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/stdlib

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/stdlib (phoenix-rtos-tests/libc/stdlib) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-stdlib'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/string

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/string (phoenix-rtos-tests/libc/string) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-string'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/signal

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/signal (phoenix-rtos-tests/libc/signal) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-signal'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/math

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/math (phoenix-rtos-tests/libc/math) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-math'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/time

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/time (phoenix-rtos-tests/libc/time) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-time'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libc/unix-socket

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/unix-socket (phoenix-rtos-tests/libc/unix-socket) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libc-unix-socket'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libcache/unit

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libcache/unit (phoenix-rtos-tests/libcache/unit) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libcache'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libtinyaes/test-libtinyaes

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libtinyaes/test-libtinyaes (phoenix-rtos-tests/libtinyaes/test-libtinyaes) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libtinyaes'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/libuuid/unit

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/libuuid/unit (phoenix-rtos-tests/libuuid/unit) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test-libuuid'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/mem/mmap

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/mem/mmap (phoenix-rtos-tests/mem/mmap) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test_mmap_new'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/port/test_register

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/port/test_register (phoenix-rtos-tests/port/test_register) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test_register'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d

Check warning on line 0 in phoenix-rtos-tests/port/test_dev

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7m7-imxrt106x-evk:phoenix-rtos-tests/port/test_dev (phoenix-rtos-tests/port/test_dev) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
 go!Phoenix-RTOS microkernel v. 3.3.2 rev. 1ddeed82 +312
hal: NXP i.MX RT10xx ARMv7 Cortex-M7 r1 p1
hal: FPU, MPU, Thumb
hal: Using NVIC interrupt controller
hal: Using General Purpose Timer
vm: Initializing page allocator 14/352 KB, page_t=12
vm: Initializing memory mapper: (214*72) 15408
vm: Initializing kernel memory allocator: (16*48) 768
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [104]
main: Starting syspage programs: 'dummyfs', 'imxrt-multi', 'psh', 'imxrt-flash', 'lwip;enet:0x402D8000:130:PHY:ksz8081rnb:0.2:irq:-10:/dev/gpio1:reset:-9:/dev/gpio1', 'test_dev'
dummyfs: initialized
lwip: enet@402d8000: initialized, MAC=02:04:29:a1:d2:2d
View more details on GitHub Actions