Embedded Systems Engineer | Robotics & ROS2 Developer | PCB & Hardware Designer
Master’s graduate in Electrical Engineering (UBC) building end-to-end embedded and robotic systems: firmware, custom hardware, wireless networks, and ROS2-based autonomy on Linux and NVIDIA Jetson. I focus on systems that actually run unattended, not demo-only toys.
- 🔹 Embedded Systems & Firmware – C/C++, real-time design, FreeRTOS, ESP32/ARM/Arduino, low-level debugging
- 🔹 Robotics & Autonomy – ROS/ROS2, perception pipelines, obstacle avoidance, LiDAR + camera fusion
- 🔹 Wireless & IoT Systems – LoRa networks, low-power design, device-to-cloud data flow
- 🔹 Hardware & PCB Design – KiCad/Altium, motor drivers, sensors, power management
- 🔹 Tools – Linux, Python, Git, MATLAB, SolidWorks
- Scalable LoRa-based sensing networks with deterministic scheduling and backend integration
- ROS2 perception and autonomy workflows on Jetson-class edge computers
🔗 https://github.com/pfatemi7/LoRa-RxTx
A synchronized LoRa master–slave network designed for long-range, low-power sensing:
- TDMA-style time slots controlled by a master broadcast
- Multiple sensor nodes transmit without collision
- Master node stores data locally (SPIFFS) and uploads via WiFi/HTTP
- Designed for environmental monitoring, smart agriculture, and remote sensing
🔗 https://github.com/pfatemi7/CameraLidar
- Real-time obstacle detection using LiDAR + stereo vision
- ROS2-based pipeline with smooth local path planning
- Targeted for Jetson-powered UAV platforms
🔗 https://github.com/pfatemi7/laser-gimbal
- Dual-axis pan/tilt servo control system
- Object tracking and stabilization logic
- Embedded control with real-time constraints
🔗 https://github.com/pfatemi7/drone_simulator
- Simulation framework for obstacle-aware drone motion
- Focus on detection, avoidance, and maneuver behavior
- Pressure-Based Motor Control System – Closed-loop actuator control using pressure transducers
- RPM Counter – Microcontroller-based motor speed measurement
- Displacement Tracker – Sensor-based displacement estimation
- CNN Image Classification (MATLAB) – Deep learning experimentation
- 💼 LinkedIn: https://www.linkedin.com/in/parham-fatemi-67ab1979/
- ✉️ Email: pfatemi7@gmail.com
- 📍 Vancouver, BC, Canada
I build systems that survive real deployment: firmware, wireless, hardware, and robotics software working together.



