fly1d · fly1d · Sep 10, 2026 · Sep 10, 2026
@@ -7,11 +7,14 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
+## [0.1.0.dev12] - 2026-09-10
+
 ### Changed
 
-- The demo now ends with a copyable read-only readiness check for its generated
-  source, CLI help and demo output link directly to support, and Markdown report
-  validation leads with a plain-language result before the evidence table.
+- The one-off `uvx` demo no longer prints follow-up commands that disappear
+  with its temporary environment. It directs users to the persistent-install
+  quick start and support, while Markdown report validation leads with a
+  plain-language result before the evidence table.
 - Community intake now has six distinct routes instead of eight: workflow
   feedback shares the Show and tell path, benchmark proposals use the general
   improvement path, and Q&A, results, and pull requests ask fewer but more

@@ -21,7 +21,7 @@ published release without installing anything into your project or system
 Python:
 
 ```sh
-uvx --from https://github.com/fly1d/repomin/releases/download/v0.1.0.dev11/repomin-0.1.0.dev11-py3-none-any.whl \
+uvx --from https://github.com/fly1d/repomin/releases/download/v0.1.0.dev12/repomin-0.1.0.dev12-py3-none-any.whl \
   repomin demo ./repomin-demo
 ```
 
@@ -33,16 +33,16 @@ ReproMin demo completed.
 Reduced: 3 files / 855 bytes -> 2 files / 276 bytes in 14 attempts.
 Removed: unused.txt and two unrelated input lines.
 Validated: exact payload fingerprint.
-Next: run `repomin doctor --help` before trying your own repository.
+Next: install ReproMin persistently, then check your repository with `repomin doctor SOURCE`.
 ```
 
 Have a public, licensed repository with a repeatable failure? [Offer it for a
 bounded pilot](https://github.com/fly1d/repomin/issues/11) with the revision,
 exact reproduction command, target exit code or failure signature, and the
 help you want. No ReproMin installation is required.
 
-The demo leaves the reduced payload and evidence report available for
-inspection and prints a copyable validation command. Continue with the
+The demo validates the reduced payload and leaves it with an evidence report
+for inspection. Continue with the
 [five-minute quick start](https://github.com/fly1d/repomin/blob/main/docs/QUICKSTART.md),
 the [PowerShell guide](https://github.com/fly1d/repomin/blob/main/docs/QUICKSTART.windows.md),
 or the [Chinese guide](https://github.com/fly1d/repomin/blob/main/docs/QUICKSTART.zh-CN.md).
@@ -92,7 +92,7 @@ exported evidence:
 
 ```sh
 python -m pip install \
-  "https://github.com/fly1d/repomin/releases/download/v0.1.0.dev11/repomin-0.1.0.dev11-py3-none-any.whl"
+  "https://github.com/fly1d/repomin/releases/download/v0.1.0.dev12/repomin-0.1.0.dev12-py3-none-any.whl"
 
 repomin doctor . \
   --command 'python -m pytest -q tests/test_checkout.py' \
@@ -129,7 +129,7 @@ can reduce a repeatable CI failure and
 upload the payload and validated report as an artifact:
 
 ```yaml
-- uses: fly1d/repomin@v0.1.0.dev11
+- uses: fly1d/repomin@v0.1.0.dev12
   with:
     command: python -m pytest -q tests/test_checkout.py
     match: FAILED tests/test_checkout.py

@@ -12,7 +12,7 @@ job's failure-handling step:
 ```yaml
 - name: Minimize failure
   if: ${{ failure() }}
-  uses: fly1d/repomin@v0.1.0.dev11
+  uses: fly1d/repomin@v0.1.0.dev12
   with:
     command: python -m pytest -q
     match: "FAILED tests/test_regression.py"
@@ -185,7 +185,7 @@ result through `holdout-status`:
 ```yaml
 - name: Certify minimized failure
   if: ${{ failure() }}
-  uses: fly1d/repomin@v0.1.0.dev11
+  uses: fly1d/repomin@v0.1.0.dev12
   with:
     command: python -m pytest -q
     match: "FAILED tests/test_regression.py"
@@ -199,7 +199,7 @@ For a command with a stable exit code but unstable output:
 ```yaml
 - name: Minimize failure
   if: ${{ failure() }}
-  uses: fly1d/repomin@v0.1.0.dev11
+  uses: fly1d/repomin@v0.1.0.dev12
   with:
     command: python -m pytest -q
     exit-code: "1"
@@ -211,7 +211,7 @@ For a Python failure where the match text may also appear in unrelated output:
 ```yaml
 - name: Minimize Python exception
   if: ${{ failure() }}
-  uses: fly1d/repomin@v0.1.0.dev11
+  uses: fly1d/repomin@v0.1.0.dev12
   with:
     command: python -m pytest -q tests/test_checkout.py
     match: "ValueError"
@@ -226,7 +226,7 @@ existing local image:
 ```yaml
 - name: Minimize Docker failure
   if: ${{ failure() }}
-  uses: fly1d/repomin@v0.1.0.dev11
+  uses: fly1d/repomin@v0.1.0.dev12
   with:
     command: python3 reproduce.py
     match: "ORIGINAL_FAILURE"
@@ -253,7 +253,7 @@ environment names or values.
 - name: Minimize failure
   if: ${{ failure() }}
   id: minimize
-  uses: fly1d/repomin@v0.1.0.dev11
+  uses: fly1d/repomin@v0.1.0.dev12
   with:
     command: python -m pytest -q
     match: "FAILED tests/test_regression.py"

@@ -15,7 +15,7 @@ available, run the published release without installing it into your project
 or system Python:
 
 ```sh
-uvx --from https://github.com/fly1d/repomin/releases/download/v0.1.0.dev11/repomin-0.1.0.dev11-py3-none-any.whl \
+uvx --from https://github.com/fly1d/repomin/releases/download/v0.1.0.dev12/repomin-0.1.0.dev12-py3-none-any.whl \
   repomin demo ./repomin-demo
 ```
 
@@ -31,15 +31,15 @@ python3 -m venv .venv
 . .venv/bin/activate
 python -m pip install --upgrade pip
 
-REPOMIN_VERSION=0.1.0.dev11
+REPOMIN_VERSION=0.1.0.dev12
 python -m pip install \
   "https://github.com/fly1d/repomin/releases/download/v${REPOMIN_VERSION}/repomin-${REPOMIN_VERSION}-py3-none-any.whl"
 
 repomin --version
 ```
 
-The final command should print `repomin 0.1.0.dev11`. The
-[release page](https://github.com/fly1d/repomin/releases/tag/v0.1.0.dev11)
+The final command should print `repomin 0.1.0.dev12`. The
+[release page](https://github.com/fly1d/repomin/releases/tag/v0.1.0.dev12)
 publishes SHA-256 digests for users who need to verify the downloaded wheel.
 
 For the shortest tour, run `repomin demo ./repomin-demo`. It creates a new

@@ -27,13 +27,13 @@ $env:PATH = (Split-Path -Parent $Python) + `
   [System.IO.Path]::PathSeparator + $env:PATH
 
 & $Python -m pip install --upgrade pip
-$env:REPOMIN_VERSION = "0.1.0.dev11"
+$env:REPOMIN_VERSION = "0.1.0.dev12"
 & $Python -m pip install "https://github.com/fly1d/repomin/releases/download/v${env:REPOMIN_VERSION}/repomin-${env:REPOMIN_VERSION}-py3-none-any.whl"
 & $Python -m repomin --version
 ```
 
-The final command should print `repomin 0.1.0.dev11`. The
-[release page](https://github.com/fly1d/repomin/releases/tag/v0.1.0.dev11)
+The final command should print `repomin 0.1.0.dev12`. The
+[release page](https://github.com/fly1d/repomin/releases/tag/v0.1.0.dev12)
 publishes SHA-256 digests for users who need to verify the downloaded wheel.
 
 For the shortest tour, run `repomin demo .\repomin-demo`. It creates a new

@@ -5,7 +5,7 @@ ReproMin 会在每次候选修改后重新执行失败命令，只保留仍能
 如果已经安装了 [`uv`](https://docs.astral.sh/uv/getting-started/installation/)，可以用一条命令体验发布版本，无需把 ReproMin 安装到项目或系统 Python：
 
 ```sh
-uvx --from https://github.com/fly1d/repomin/releases/download/v0.1.0.dev11/repomin-0.1.0.dev11-py3-none-any.whl \
+uvx --from https://github.com/fly1d/repomin/releases/download/v0.1.0.dev12/repomin-0.1.0.dev12-py3-none-any.whl \
   repomin demo ./repomin-demo
 ```
 
@@ -20,19 +20,19 @@ PyPI。建议先使用虚拟环境，避免修改系统 Python：
 python3 -m venv .venv
 . .venv/bin/activate
 python -m pip install --upgrade pip
-REPOMIN_VERSION=0.1.0.dev11
+REPOMIN_VERSION=0.1.0.dev12
 python -m pip install \
   "https://github.com/fly1d/repomin/releases/download/v${REPOMIN_VERSION}/repomin-${REPOMIN_VERSION}-py3-none-any.whl"
 python -m repomin --version
 ```
 
-当前版本应显示 `repomin 0.1.0.dev11`。发布页同时提供 wheel 和源码归档，以及对应的
+当前版本应显示 `repomin 0.1.0.dev12`。发布页同时提供 wheel 和源码归档，以及对应的
 SHA-256 校验值；需要供应链校验时，请先核对
-[发布页](https://github.com/fly1d/repomin/releases/tag/v0.1.0.dev11)再安装。wheel 不需要
+[发布页](https://github.com/fly1d/repomin/releases/tag/v0.1.0.dev12)再安装。wheel 不需要
 本地构建，首次使用更快。
 
 本页后面的 `report replay`、传输 fingerprint 和 Markdown 摘要功能已包含在
-`v0.1.0.dev11` 发布包中。
+`v0.1.0.dev12` 发布包中。
 参与 pilot 前仍请阅读[真实失败 pilot 指南](REAL_FAILURE_PILOT.md)，并按其中的隐私和
 安全边界检查报告与 payload。
 

@@ -33,13 +33,13 @@ project until a human has reviewed the artifact and that project's policies.
 ## Install the pilot build
 
 The replay and transport-fingerprint workflow described below is included in
-the `v0.1.0.dev11` pre-release. Install that wheel in an isolated environment
+the `v0.1.0.dev12` pre-release. Install that wheel in an isolated environment
 when you want a reproducible versioned pilot run:
 
 ```sh
 python3 -m venv .venv
 . .venv/bin/activate
-REPOMIN_VERSION=0.1.0.dev11
+REPOMIN_VERSION=0.1.0.dev12
 python -m pip install \
   "https://github.com/fly1d/repomin/releases/download/v${REPOMIN_VERSION}/repomin-${REPOMIN_VERSION}-py3-none-any.whl"
 python -m repomin --version

@@ -9,7 +9,7 @@ found.
 The command stored in a report is executable input. Review the report and the
 payload before acknowledging execution with `--yes`.
 
-This command is included in the `v0.1.0.dev11` pre-release. For a pilot report,
+This command is included in the `v0.1.0.dev12` pre-release. For a pilot report,
 record the installed version and (when installing from source) the Git SHA as
 described in the [pilot guide](REAL_FAILURE_PILOT.md).
 

@@ -1,3 +1,3 @@
 """Repository-level failure reducer."""
 
-__version__ = "0.1.0.dev11"
+__version__ = "0.1.0.dev12"
@@ -106,6 +106,7 @@
 HOST_WORKING_DIRECTORY_POLICY = "host-output-basename-v1"
 DOCKER_WORKING_DIRECTORY_POLICY = "docker-workspace-v1"
 _SUPPORT_URL = "https://github.com/fly1d/repomin/blob/main/SUPPORT.md"
+_QUICKSTART_URL = "https://github.com/fly1d/repomin/blob/main/docs/QUICKSTART.md"
 _BYTE_SIZE = re.compile(r"^(?P<number>[1-9][0-9]*)(?P<suffix>[kmgt]i?b?|b)?$")
 _BYTE_MULTIPLIERS = {
     "": 1,
@@ -925,12 +926,11 @@ def _demo_command(argv: Sequence[str]) -> int:
         print("Workspace: %s" % workspace)
         print("Payload: %s" % payload)
         print("Report: %s" % report_path)
-        print("Repeat validation:")
-        print("  %s" % _validation_command(report_path, payload))
         print(
-            "Next: run `repomin doctor %s` for a read-only readiness check."
-            % _quote_cli_argument(source)
+            "Next: install ReproMin persistently, then check your repository "
+            "with `repomin doctor SOURCE`."
         )
+        print("Quick start: %s" % _QUICKSTART_URL)
         print("Help or feedback: %s" % _SUPPORT_URL)
         return 0
     except KeyboardInterrupt:

@@ -29,7 +29,6 @@
     _parse_ignore_path,
     _load_gitignore,
     _parse_rate,
-    _quote_cli_argument,
     _run_fixed_point,
     _working_directory_configuration,
     build_parser,
@@ -446,14 +445,15 @@ def test_demo_runs_real_reducer_and_validates_payload(self) -> None:
             self.assertIn("Removed: unused.txt", stdout.getvalue())
             self.assertIn("Validated: exact payload fingerprint.", stdout.getvalue())
             self.assertIn("only NEEDLE remains", stdout.getvalue())
-            self.assertIn("Repeat validation:", stdout.getvalue())
-            self.assertIn("--format markdown", stdout.getvalue())
+            self.assertNotIn("Repeat validation:", stdout.getvalue())
+            self.assertNotIn("repomin report validate", stdout.getvalue())
+            self.assertIn("install ReproMin persistently", stdout.getvalue())
+            self.assertIn("repomin doctor SOURCE", stdout.getvalue())
             self.assertIn(
-                "repomin doctor %s"
-                % _quote_cli_argument((workspace / "source").resolve()),
+                "Quick start: "
+                "https://github.com/fly1d/repomin/blob/main/docs/QUICKSTART.md",
                 stdout.getvalue(),
             )
-            self.assertIn("for a read-only readiness check", stdout.getvalue())
             self.assertIn(
                 "Help or feedback: "
                 "https://github.com/fly1d/repomin/blob/main/SUPPORT.md",