Remove sound directory from kernel build

.gitignore

@@ -70,7 +70,7 @@ modules.order
 #
 # Debian directory (make deb-pkg)
 #
-/debian/
+#/debian/
 
 #
 # Snap directory (make snap-pkg)

Documentation/ABI/stable/sysfs-driver-mlxreg-io

@@ -29,13 +29,13 @@ Description:	This file shows the system fans direction:
 
 		The files are read only.
 
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
 
 Date:		November 2018
 KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
-		on LED board.
+		on LED or Gearbox board.
 
 		The files are read only.
 
@@ -121,6 +121,15 @@ Description:	These files show the system reset cause, as following: ComEx
 
 		The files are read only.
 
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
+Date:		November 2018
+KernelVersion:	5.0
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD versions have been burned
+		on LED board.
+
+		The files are read only.
+
 Date:		June 2019
 KernelVersion:	5.3
 Contact:	Vadim Pasternak <vadimpmellanox.com>

Documentation/ABI/testing/debugfs-aufs

@@ -0,0 +1,55 @@
+What:		/debug/aufs/si_<id>/
+Date:		March 2009
+Contact:	J. R. Okajima <hooanon05g@gmail.com>
+Description:
+		Under /debug/aufs, a directory named si_<id> is created
+		per aufs mount, where <id> is a unique id generated
+		internally.
+
+What:		/debug/aufs/si_<id>/plink
+Date:		Apr 2013
+Contact:	J. R. Okajima <hooanon05g@gmail.com>
+Description:
+		It has three lines and shows the information about the
+		pseudo-link. The first line is a single number
+		representing a number of buckets. The second line is a
+		number of pseudo-links per buckets (separated by a
+		blank). The last line is a single number representing a
+		total number of psedo-links.
+		When the aufs mount option 'noplink' is specified, it
+		will show "1\n0\n0\n".
+
+What:		/debug/aufs/si_<id>/xib
+Date:		March 2009
+Contact:	J. R. Okajima <hooanon05g@gmail.com>
+Description:
+		It shows the consumed blocks by xib (External Inode Number
+		Bitmap), its block size and file size.
+		When the aufs mount option 'noxino' is specified, it
+		will be empty. About XINO files, see the aufs manual.
+
+What:		/debug/aufs/si_<id>/xi0, xi1 ... xiN and xiN-N
+Date:		March 2009
+Contact:	J. R. Okajima <hooanon05g@gmail.com>
+Description:
+		It shows the consumed blocks by xino (External Inode Number
+		Translation Table), its link count, block size and file
+		size.
+		Due to the file size limit, there may exist multiple
+		xino files per branch.  In this case, "-N" is added to
+		the filename and it corresponds to the index of the
+		internal xino array.  "-0" is omitted.
+		When the aufs mount option 'noxino' is specified, Those
+		entries won't exist.  About XINO files, see the aufs
+		manual.
+
+What:		/debug/aufs/si_<id>/xigen
+Date:		March 2009
+Contact:	J. R. Okajima <hooanon05g@gmail.com>
+Description:
+		It shows the consumed blocks by xigen (External Inode
+		Generation Table), its block size and file size.
+		If CONFIG_AUFS_EXPORT is disabled, this entry will not
+		be created.
+		When the aufs mount option 'noxino' is specified, it
+		will be empty. About XINO files, see the aufs manual.

Documentation/ABI/testing/debugfs-hisi-hpre

@@ -0,0 +1,57 @@
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/regs
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump debug registers from the HPRE cluster.
+		Only available for PF.
+
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/cluster_ctrl
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Write the HPRE core selection in the cluster into this file,
+		and then we can read the debug information of the core.
+		Only available for PF.
+
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/rdclr_en
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    HPRE cores debug registers read clear control. 1 means enable
+		register read clear, otherwise 0. Writing to this file has no
+		functional effect, only enable or disable counters clear after
+		reading of these registers.
+		Only available for PF.
+
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/current_qm
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    One HPRE controller has one PF and multiple VFs, each function
+		has a QM. Select the QM which below qm refers to.
+		Only available for PF.
+
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/regs
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump debug registers from the HPRE.
+		Only available for PF.
+
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/qm_regs
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump debug registers from the QM.
+		Available for PF and VF in host. VF in guest currently only
+		has one debug register.
+
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    One QM may contain multiple queues. Select specific queue to
+		show its debug registers in above qm_regs.
+		Only available for PF.
+
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    QM debug registers(qm_regs) read clear control. 1 means enable
+		register read clear, otherwise 0.
+		Writing to this file has no functional effect, only enable or
+		disable counters clear after reading of these registers.
+		Only available for PF.

Documentation/ABI/testing/debugfs-hisi-sec

@@ -0,0 +1,43 @@
+What:           /sys/kernel/debug/hisi_sec/<bdf>/sec_dfx
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the debug registers of SEC cores.
+		Only available for PF.
+
+What:           /sys/kernel/debug/hisi_sec/<bdf>/clear_enable
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Enabling/disabling of clear action after reading
+		the SEC debug registers.
+		0: disable, 1: enable.
+		Only available for PF, and take no other effect on SEC.
+
+What:           /sys/kernel/debug/hisi_sec/<bdf>/current_qm
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    One SEC controller has one PF and multiple VFs, each function
+		has a QM. This file can be used to select the QM which below
+		qm refers to.
+		Only available for PF.
+
+What:           /sys/kernel/debug/hisi_sec/<bdf>/qm/qm_regs
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump of QM related debug registers.
+		Available for PF and VF in host. VF in guest currently only
+		has one debug register.
+
+What:           /sys/kernel/debug/hisi_sec/<bdf>/qm/current_q
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    One QM of SEC may contain multiple queues. Select specific
+		queue to show its debug registers in above 'qm_regs'.
+		Only available for PF.
+
+What:           /sys/kernel/debug/hisi_sec/<bdf>/qm/clear_enable
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Enabling/disabling of clear action after reading
+		the SEC's QM debug registers.
+		0: disable, 1: enable.
+		Only available for PF, and take no other effect on SEC.

Documentation/ABI/testing/evm

@@ -42,8 +42,30 @@ Description:
 		modification of EVM-protected metadata and
 		disable all further modification of policy
 
-		Note that once a key has been loaded, it will no longer be
-		possible to enable metadata modification.
+		Echoing a value is additive, the new value is added to the
+		existing initialization flags.
+
+		For example, after::
+
+		  echo 2 ><securityfs>/evm
+
+		another echo can be performed::
+
+		  echo 1 ><securityfs>/evm
+
+		and the resulting value will be 3.
+
+		Note that once an HMAC key has been loaded, it will no longer
+		be possible to enable metadata modification. Signaling that an
+		HMAC key has been loaded will clear the corresponding flag.
+		For example, if the current value is 6 (2 and 4 set)::
+
+		  echo 1 ><securityfs>/evm
+
+		will set the new value to 3 (4 cleared).
+
+		Loading an HMAC key is the only way to disable metadata
+		modification.
 
 		Until key loading has been signaled EVM can not create
 		or validate the 'security.evm' xattr, but returns

Documentation/ABI/testing/ima_policy

@@ -25,6 +25,7 @@ Description:
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 			option:	[[appraise_type=]] [template=] [permit_directio]
+				[appraise_flag=]
 		base: 	func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK]
 				[FIRMWARE_CHECK]
 				[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
@@ -38,6 +39,9 @@ Description:
 			fowner:= decimal value
 		lsm:  	are LSM specific
 		option:	appraise_type:= [imasig] [imasig|modsig]
+			appraise_flag:= [check_blacklist]
+			Currently, blacklist check is only for files signed with appended
+			signature.
 			template:= name of a defined IMA template type
 			(eg, ima-ng). Only valid when action is "measure".
 			pcr:= decimal value

Documentation/ABI/testing/sysfs-ata

@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or

Documentation/ABI/testing/sysfs-aufs

@@ -0,0 +1,31 @@
+What:		/sys/fs/aufs/si_<id>/
+Date:		March 2009
+Contact:	J. R. Okajima <hooanon05g@gmail.com>
+Description:
+		Under /sys/fs/aufs, a directory named si_<id> is created
+		per aufs mount, where <id> is a unique id generated
+		internally.
+
+What:		/sys/fs/aufs/si_<id>/br0, br1 ... brN
+Date:		March 2009
+Contact:	J. R. Okajima <hooanon05g@gmail.com>
+Description:
+		It shows the abolute path of a member directory (which
+		is called branch) in aufs, and its permission.
+
+What:		/sys/fs/aufs/si_<id>/brid0, brid1 ... bridN
+Date:		July 2013
+Contact:	J. R. Okajima <hooanon05g@gmail.com>
+Description:
+		It shows the id of a member directory (which is called
+		branch) in aufs.
+
+What:		/sys/fs/aufs/si_<id>/xi_path
+Date:		March 2009
+Contact:	J. R. Okajima <hooanon05g@gmail.com>
+Description:
+		It shows the abolute path of XINO (External Inode Number
+		Bitmap, Translation Table and Generation Table) file
+		even if it is the default path.
+		When the aufs mount option 'noxino' is specified, it
+		will be empty. About XINO files, see the aufs manual.

Documentation/ABI/testing/sysfs-bus-iio

@@ -1566,7 +1566,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
 KernelVersion:	4.3
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled no offset etc.) percentage reading of a substance.
+		Raw (unscaled no offset etc.) reading of a substance. Units
+		after application of scale and offset are percents.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw

Documentation/ABI/testing/sysfs-bus-iio-vf610

@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
 KernelVersion:	4.2
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/ABI/testing/sysfs-bus-mei

@@ -4,7 +4,7 @@ KernelVersion:	3.10
 Contact:	Samuel Ortiz <sameo@linux.intel.com>
 		linux-mei@linux.intel.com
 Description:	Stores the same MODALIAS value emitted by uevent
-		Format: mei:<mei device name>:<device uuid>:
+		Format: mei:<mei device name>:<device uuid>:<protocol version>
 
 What:		/sys/bus/mei/devices/.../name
 Date:		May 2015

Documentation/ABI/testing/sysfs-bus-pci

@@ -347,3 +347,16 @@ Description:
 		If the device has any Peer-to-Peer memory registered, this
 	        file contains a '1' if the memory has been published for
 		use outside the driver that owns the device.
+
+What:		/sys/bus/pci/devices/.../link/clkpm
+		/sys/bus/pci/devices/.../link/l0s_aspm
+		/sys/bus/pci/devices/.../link/l1_aspm
+		/sys/bus/pci/devices/.../link/l1_1_aspm
+		/sys/bus/pci/devices/.../link/l1_2_aspm
+		/sys/bus/pci/devices/.../link/l1_1_pcipm
+		/sys/bus/pci/devices/.../link/l1_2_pcipm
+Date:		October 2019
+Contact:	Heiner Kallweit <hkallweit1@gmail.com>
+Description:	If ASPM is supported for an endpoint, these files can be
+		used to disable or enable the individual power management
+		states. Write y/1/on to enable, n/0/off to disable.

Documentation/ABI/testing/sysfs-class-devfreq

@@ -7,6 +7,13 @@ Description:
 		The name of devfreq object denoted as ... is same as the
 		name of device using devfreq.
 
+What:		/sys/class/devfreq/.../name
+Date:		November 2019
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq/.../name shows the name of device
+		of the corresponding devfreq object.
+
 What:		/sys/class/devfreq/.../governor
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -486,8 +486,10 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/l1tf
 		/sys/devices/system/cpu/vulnerabilities/mds
+		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities