Skip to content

About

No description, website, or topics provided.

Resources

Stars

0 stars

Watchers

1 watching

Forks

Repository files navigation

Design Analysis: Electrical Power System

This repository contains the MATLAB implementation and supporting documentation for analyzing and calculating parameters within a given electrical power system. The project focuses on short-circuit calculations and impedance modeling as part of a construction design assignment.

Project Overview

The primary objective is to analyze an electrical power network, specifically to:

  1. Calculate current and voltage conditions at the short-circuit location.
  2. Determine the contribution of individual sources to the short-circuit current.

The network comprises various components, including generators, transformers (two- and three-winding), transmission lines, and active networks. The analysis is based on specific input data provided in the accompanying documentation.

Repository Contents

  • konstrukcijski_izracun.m: The MATLAB script for performing short-circuit calculations and impedance transformations.
  • Documentation: PDF outlining the task, input data, and methodology for calculations.

Features

  1. Short-Circuit Analysis: Calculates currents and voltages under fault conditions.
  2. Impedance Transformation: Converts parameters to a unified reference voltage level.
  3. Source Contributions: Determines the share of each generator, transformer, and motor in the fault current.

Input Data

The system parameters, as described in the documentation, include:

  • Generators: Characteristics such as power ratings, reactances, and grounding conditions.
  • Transformers: Data for two- and three-winding transformers, including connection groups and short-circuit impedances.
  • Transmission Lines: Impedance values based on line length and voltage level.
  • Motors: Contributions to the fault current depending on their ratings and operating conditions.

Usage

Prerequisites

  • MATLAB R2021a (or later)

Running the Script

  1. Clone the repository:
  2. Adjust the input parameters as necessary within the script to match your system configuration.
  3. Run the script to obtain:
  • Voltage and current conditions at the fault location.
  • Individual source contributions to the short-circuit current.

Output

The script provides detailed output for:

  • Short-circuit currents and voltages.
  • Contributions from each generator, motor, and transformer.
  • Equivalent network impedance.

About

No description, website, or topics provided.

Resources

Stars

0 stars

Watchers

1 watching

Forks

Releases

Packages

Contributors

Languages