Merge RC4.2.0_master-localization into RC4.2.0_master

doc/distrib/Templates/cs-CZ/Make a Custom Node.dyn

@@ -3612,7 +3612,7 @@
       },
       {
         "Id": "c58f8dba2e78425780e476a1cf51e11e",
-        "Title": "ASSOCIATED FILE(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
+        "Title": "ASOCIOVANÉ SOUBORY\n_____________________________________________________ \n\nCurveValidate.dyf\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,
@@ -3672,7 +3672,7 @@
       },
       {
         "Id": "3a1bbb44014c4cbaa7946c1d55a5aaf7",
-        "Title": "ADDITIONAL COMMENTS\n_____________________________________________________ \n\nCustom nodes are typically found in the Add-ons section of the Library.\r\nThis custom node is located under:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nIf it does not appear:\r\n\r\nCheck that the .dyf file is in your custom nodes folder\r\n\r\nGo to:\r\nPackages → Package Manager → Package Settings → Package/Library Search Paths\r\nVerify the folder path is listed or add a new path\r\nRestart Dynamo after adding new custom nodes\n",
+        "Title": "DALŠÍ KOMENTÁŘE\n_____________________________________________________ \n\nVlastní uzly se obvykle nacházejí v knihovně v části Doplňky.\r\nTento vlastní uzel se nachází v umístění:\r\nDoplňky → Šablony → Křivka → Curve_Validate\r\n\r\nPokud se nezobrazí:\r\n\r\nZkontrolujte, zda je soubor .dyf ve složce vlastních uzlů.\r\n\r\nPřejděte na:\r\nBalíčky → Package Manager → Nastavení balíčku → Vyhledávací cesty balíčku/knihovny\r\nOvěřte, zda je cesta ke složce uvedena, nebo přidejte novou cestu.\r\nPo přidání nových vlastních uzlů restartujte aplikaci Dynamo\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,

doc/distrib/Templates/de-DE/Make a Custom Node.dyn

@@ -3612,7 +3612,7 @@
       },
       {
         "Id": "c58f8dba2e78425780e476a1cf51e11e",
-        "Title": "ASSOCIATED FILE(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
+        "Title": "VERKNÜPFTE DATEI(EN)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,
@@ -3672,7 +3672,7 @@
       },
       {
         "Id": "3a1bbb44014c4cbaa7946c1d55a5aaf7",
-        "Title": "ADDITIONAL COMMENTS\n_____________________________________________________ \n\nCustom nodes are typically found in the Add-ons section of the Library.\r\nThis custom node is located under:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nIf it does not appear:\r\n\r\nCheck that the .dyf file is in your custom nodes folder\r\n\r\nGo to:\r\nPackages → Package Manager → Package Settings → Package/Library Search Paths\r\nVerify the folder path is listed or add a new path\r\nRestart Dynamo after adding new custom nodes\n",
+        "Title": "ZUSÄTZLICHE KOMMENTARE\n_____________________________________________________ \n\nBenutzerdefinierte Blöcke befinden sich in der Regel im Abschnitt Add-Ons der Bibliothek.\nDieser benutzerdefinierte Block befindet sich unter:\nAdd-Ons → Vorlagen → Kurve → Curve_Validate\n\nWenn er nicht angezeigt wird:\n\nÜberprüfen Sie, ob sich die DYF-Datei in Ihrem Ordner für benutzerdefinierte Blöcke befindet\n\nNavigieren Sie zu:\nPakete → Package Manager → Paketeinstellungen → Paket-/Bibliothekssuchpfade\nStellen Sie sicher, dass der Ordnerpfad aufgeführt ist, oder fügen Sie einen neuen Pfad hinzu\nStarten Sie Dynamo nach dem Hinzufügen neuer benutzerdefinierter Blöcke neu\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,

doc/distrib/Templates/es-ES/Make a Custom Node.dyn

@@ -3612,7 +3612,7 @@
       },
       {
         "Id": "c58f8dba2e78425780e476a1cf51e11e",
-        "Title": "ASSOCIATED FILE(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
+        "Title": "ARCHIVO(S) ASOCIADO(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,
@@ -3672,7 +3672,7 @@
       },
       {
         "Id": "3a1bbb44014c4cbaa7946c1d55a5aaf7",
-        "Title": "ADDITIONAL COMMENTS\n_____________________________________________________ \n\nCustom nodes are typically found in the Add-ons section of the Library.\r\nThis custom node is located under:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nIf it does not appear:\r\n\r\nCheck that the .dyf file is in your custom nodes folder\r\n\r\nGo to:\r\nPackages → Package Manager → Package Settings → Package/Library Search Paths\r\nVerify the folder path is listed or add a new path\r\nRestart Dynamo after adding new custom nodes\n",
+        "Title": "COMENTARIOS ADICIONALES\n_____________________________________________________ \n\nLos nodos personalizados se encuentran normalmente en la sección de complementos de la biblioteca.\r\nEste nodo personalizado se encuentra en:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nSi no aparece, realice lo siguiente:\r\n\r\nCompruebe que el archivo .dyf se encuentre en la carpeta de nodos personalizados.\r\n\r\nAcceda a la siguiente ubicación:\r\nPaquetes → Package Manager → Configuración de paquetes → Rutas de búsqueda de paquetes/bibliotecas\r\nCompruebe que la ruta de la carpeta aparece en la lista o añada una nueva ruta.\r\nReinicie Dynamo después de añadir nuevos nodos personalizados.\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,

doc/distrib/Templates/fr-FR/Make a Custom Node.dyn

@@ -3612,7 +3612,7 @@
       },
       {
         "Id": "c58f8dba2e78425780e476a1cf51e11e",
-        "Title": "ASSOCIATED FILE(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
+        "Title": "FICHIER(S) ASSOCIÉ(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,
@@ -3672,7 +3672,7 @@
       },
       {
         "Id": "3a1bbb44014c4cbaa7946c1d55a5aaf7",
-        "Title": "ADDITIONAL COMMENTS\n_____________________________________________________ \n\nCustom nodes are typically found in the Add-ons section of the Library.\r\nThis custom node is located under:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nIf it does not appear:\r\n\r\nCheck that the .dyf file is in your custom nodes folder\r\n\r\nGo to:\r\nPackages → Package Manager → Package Settings → Package/Library Search Paths\r\nVerify the folder path is listed or add a new path\r\nRestart Dynamo after adding new custom nodes\n",
+        "Title": "COMMENTAIRES SUPPLÉMENTAIRES\n_____________________________________________________ \n\nLes noeuds personnalisés se trouvent généralement dans la section Modules complémentaires de la bibliothèque.\r\nCe noeud personnalisé se trouve sous:\r\nModules complémentaires → Gabarits → Curve → Curve_Validate\r\n\r\nS'il n'apparaît pas:\r\n\r\nVérifiez que le fichier .dyf se trouve dans votre dossier de noeuds personnalisés\r\n\r\nAccédez à:\r\nPaquets → Gestionnaire de paquets → Paramètres des paquets → Chemins de recherche de paquets/bibliothèque\r\nVérifiez que le chemin d'accès au dossier est répertorié ou ajoutez un nouveau chemin\r\nRedémarrez Dynamo après avoir ajouté de nouveaux noeuds personnalisés\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,

doc/distrib/Templates/it-IT/Make a Custom Node.dyn

@@ -3612,7 +3612,7 @@
       },
       {
         "Id": "c58f8dba2e78425780e476a1cf51e11e",
-        "Title": "ASSOCIATED FILE(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
+        "Title": "FILE ASSOCIATI\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,
@@ -3672,7 +3672,7 @@
       },
       {
         "Id": "3a1bbb44014c4cbaa7946c1d55a5aaf7",
-        "Title": "ADDITIONAL COMMENTS\n_____________________________________________________ \n\nCustom nodes are typically found in the Add-ons section of the Library.\r\nThis custom node is located under:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nIf it does not appear:\r\n\r\nCheck that the .dyf file is in your custom nodes folder\r\n\r\nGo to:\r\nPackages → Package Manager → Package Settings → Package/Library Search Paths\r\nVerify the folder path is listed or add a new path\r\nRestart Dynamo after adding new custom nodes\n",
+        "Title": "COMMENTI AGGIUNTIVI\n_____________________________________________________ \n\nI nodi personalizzati si trovano in genere nella sezione Moduli aggiuntivi della libreria.\nQuesto nodo personalizzato si trova in:\nModuli aggiuntivi → Modelli → Curva → Curve_Validate\n\nSe non viene visualizzato:\n\nVerificare che il file .dyf si trovi nella cartella dei nodi personalizzati\n\nAccedere a:\nPacchetti → Package Manager → Impostazioni pacchetto → Percorsi di ricerca di pacchetti/librerie.\nVerificare che il percorso della cartella sia presente nell'elenco o aggiungere un nuovo percorso.\nRiavviare Dynamo dopo l'aggiunta di nuovi nodi personalizzati.\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,

doc/distrib/Templates/ja-JP/Make a Custom Node.dyn

@@ -3612,7 +3612,7 @@
       },
       {
         "Id": "c58f8dba2e78425780e476a1cf51e11e",
-        "Title": "ASSOCIATED FILE(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
+        "Title": "関連ファイル\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,
@@ -3672,7 +3672,7 @@
       },
       {
         "Id": "3a1bbb44014c4cbaa7946c1d55a5aaf7",
-        "Title": "ADDITIONAL COMMENTS\n_____________________________________________________ \n\nCustom nodes are typically found in the Add-ons section of the Library.\r\nThis custom node is located under:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nIf it does not appear:\r\n\r\nCheck that the .dyf file is in your custom nodes folder\r\n\r\nGo to:\r\nPackages → Package Manager → Package Settings → Package/Library Search Paths\r\nVerify the folder path is listed or add a new path\r\nRestart Dynamo after adding new custom nodes\n",
+        "Title": "その他のコメント\n_____________________________________________________ \n\nカスタム ノードは通常、ライブラリのアドオン セクションにあります。\r\nこのカスタム ノードは、次の場所にあります。\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\n表示されない場合:\r\n\r\n.dyf ファイルがカスタム ノード フォルダ内にあることを確認します\r\n\r\n次に移動します。\r\nパッケージ → Package Manager → パッケージの設定 → パッケージ/ライブラリ検索パス\r\nフォルダのパスが表示されていることを確認するか、新しいパスを追加します\r\n新しいカスタム ノードを追加した後に Dynamo を再起動します\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,

doc/distrib/Templates/ko-KR/Make a Custom Node.dyn

@@ -3612,7 +3612,7 @@
       },
       {
         "Id": "c58f8dba2e78425780e476a1cf51e11e",
-        "Title": "ASSOCIATED FILE(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
+        "Title": "연관된 파일\n_____________________________________________________ \n\nCurveValidate.dyf\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,
@@ -3672,7 +3672,7 @@
       },
       {
         "Id": "3a1bbb44014c4cbaa7946c1d55a5aaf7",
-        "Title": "ADDITIONAL COMMENTS\n_____________________________________________________ \n\nCustom nodes are typically found in the Add-ons section of the Library.\r\nThis custom node is located under:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nIf it does not appear:\r\n\r\nCheck that the .dyf file is in your custom nodes folder\r\n\r\nGo to:\r\nPackages → Package Manager → Package Settings → Package/Library Search Paths\r\nVerify the folder path is listed or add a new path\r\nRestart Dynamo after adding new custom nodes\n",
+        "Title": "추가 주석\n_____________________________________________________ \n\n사용자 노드는 일반적으로 라이브러리의 애드온 섹션에서 찾을 수 있습니다.\r\n이 사용자 노드의 위치:\r\n애드온 → 템플릿 → 곡선 → Curve_Validate\r\n\r\n노드가 표시되지 않는 경우:\r\n\r\n.dyf 파일이 사용자 노드 폴더에 있는지 확인합니다\r\n\r\n이동 경로:\r\n패키지 → 패키지 관리자 → 패키지 설정 → 패키지/라이브러리 검색 경로\r\n해당 폴더 경로가 나열되어 있는지 확인하거나 새 경로를 추가합니다\r\n새 사용자 노드를 추가한 후 Dynamo를 다시 시작합니다\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,

doc/distrib/Templates/pl-PL/Make a Custom Node.dyn

@@ -3612,7 +3612,7 @@
       },
       {
         "Id": "c58f8dba2e78425780e476a1cf51e11e",
-        "Title": "ASSOCIATED FILE(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
+        "Title": "POWIĄZANE PLIKI\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,
@@ -3672,7 +3672,7 @@
       },
       {
         "Id": "3a1bbb44014c4cbaa7946c1d55a5aaf7",
-        "Title": "ADDITIONAL COMMENTS\n_____________________________________________________ \n\nCustom nodes are typically found in the Add-ons section of the Library.\r\nThis custom node is located under:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nIf it does not appear:\r\n\r\nCheck that the .dyf file is in your custom nodes folder\r\n\r\nGo to:\r\nPackages → Package Manager → Package Settings → Package/Library Search Paths\r\nVerify the folder path is listed or add a new path\r\nRestart Dynamo after adding new custom nodes\n",
+        "Title": "DODATKOWE KOMENTARZE\n_____________________________________________________ \n\nWęzły niestandardowe znajdują się zazwyczaj w sekcji Dodatki w bibliotece.\r\nTen węzeł niestandardowy znajduje się w kategorii:\r\nDodatki → Szablony → Krzywa → Curve_Validate\r\n\r\nJeśli go tam nie ma:\r\n\r\nSprawdź, czy plik DYF znajduje się w folderze węzłów niestandardowych.\r\n\r\nPrzejdź do:\r\nPakiety → Menedżer pakietów → Ustawienia pakietów → Ścieżki wyszukiwania pakietów/biblioteki\r\nSprawdź, czy ścieżka folderu znajduje się na liście, lub dodaj nową ścieżkę.\r\nPo dodaniu nowych węzłów niestandardowych uruchom ponownie dodatek Dynamo.\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,

doc/distrib/Templates/pt-BR/Make a Custom Node.dyn

@@ -3612,7 +3612,7 @@
       },
       {
         "Id": "c58f8dba2e78425780e476a1cf51e11e",
-        "Title": "ASSOCIATED FILE(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
+        "Title": "ARQUIVOS ASSOCIADOS\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,
@@ -3672,7 +3672,7 @@
       },
       {
         "Id": "3a1bbb44014c4cbaa7946c1d55a5aaf7",
-        "Title": "ADDITIONAL COMMENTS\n_____________________________________________________ \n\nCustom nodes are typically found in the Add-ons section of the Library.\r\nThis custom node is located under:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nIf it does not appear:\r\n\r\nCheck that the .dyf file is in your custom nodes folder\r\n\r\nGo to:\r\nPackages → Package Manager → Package Settings → Package/Library Search Paths\r\nVerify the folder path is listed or add a new path\r\nRestart Dynamo after adding new custom nodes\n",
+        "Title": "COMENTÁRIOS ADICIONAIS\n_____________________________________________________ \n\nOs nós personalizados são normalmente encontrados na seção Complementos da biblioteca.\r\nEsse nó personalizado está localizado em:\r\nComplementos → Modelos → Curva → Curve_Validate\r\n\r\nSe não aparecer:\r\n\r\nVerifique se o arquivo .dyf está na pasta de nós personalizados\r\n\r\nAcesse:\r\nPacotes → Package Manager → Configurações do pacote → Caminhos de pesquisa de pacotes/bibliotecas\r\nVerifique se o caminho da pasta está listado ou adicione um novo caminho\r\nReinicie o Dynamo após adicionar os novos nós personalizados\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,

doc/distrib/Templates/ru-RU/Make a Custom Node.dyn

@@ -3612,7 +3612,7 @@
       },
       {
         "Id": "c58f8dba2e78425780e476a1cf51e11e",
-        "Title": "ASSOCIATED FILE(S)\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
+        "Title": "СВЯЗАННЫЕ ФАЙЛЫ\n_____________________________________________________ \n\nCurve_Validate.dyf\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,
@@ -3672,7 +3672,7 @@
       },
       {
         "Id": "3a1bbb44014c4cbaa7946c1d55a5aaf7",
-        "Title": "ADDITIONAL COMMENTS\n_____________________________________________________ \n\nCustom nodes are typically found in the Add-ons section of the Library.\r\nThis custom node is located under:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nIf it does not appear:\r\n\r\nCheck that the .dyf file is in your custom nodes folder\r\n\r\nGo to:\r\nPackages → Package Manager → Package Settings → Package/Library Search Paths\r\nVerify the folder path is listed or add a new path\r\nRestart Dynamo after adding new custom nodes\n",
+        "Title": "ДОПОЛНИТЕЛЬНЫЕ КОММЕНТАРИИ\n_____________________________________________________ \n\nПользовательские узлы обычно находятся в разделе Add-ons библиотеки.\r\nЭтот пользовательский узел находится в папке:\r\nAdd-ons → Templates → Curve → Curve_Validate\r\n\r\nЕсли он не отображается:\r\n\r\nУбедитесь, что файл DYF находится в папке пользовательских узлов\r\n\r\nПерейдите в раздел:\r\nПакеты → Package Manager → Параметры пакета → Пути поиска пакетов/библиотек\r\nУбедитесь, что путь к папке указан в списке, или добавьте новый путь\r\nПерезапустите Dynamo после добавления новых пользовательских узлов\n",
         "DescriptionText": null,
         "IsExpanded": true,
         "WidthAdjustment": 0.0,