sunmodel

#!/bin/sh
#
# sunmodel
# from ftp://ftp.fwi.uva.nl/pub/comp/solaris/sunmodel
# modified by Phil Budne <phil@ultimate.com> for C-MAINBOL distribution
#
# Parse output from devinfo/prtconf
#  and display the kind of Sun and its clock 
# frequency.
#
# Jan Wortelboer  (janw@fwi.uva.nl) 
# idea from Chris Metcalf, metcalf@lcs.mit.edu
# version 1.6.1 6 April 1994
# changed trying to adjust to SPARCstation 20 and SPARCstation 5
# version 1.7     01 June 1994 added FrameBuffer
# version 1.8     08 June 1994 690 corrected
# version 1.9     20 januari 1995 TGX-PLUS added
# version 1.99    24 februari 1995 More GX specs
# version 1.999   24 may 1995 TCX trial, i am not happy with it.
# version 1.9999  04 august 1995 support for Ross,RT625
# version 2.0000  10 oktober 1995 egrep removed, expr was to large for sunos.
#                    added memory size
# version 2.0001  17 januari 1996 added support for ultra.
# version 2.0002  01 march 1996 added support for Ross,RT625 without cpuF
# version 2.0003  01 may 1996 added support for Ross,CY605 without cpuF
#
# $Log$
# Revision 1.2  1997/07/27  01:54:44  phil
# use hostid on system without openprom
# rearrange to (hopefully) work on sunos 4.0 (and 3.0) shell
#

if [ -f /usr/bin/uname ]; then
	version=`uname -r`
	hostje=`uname -n`
else
	# no uname command; pre-SunOS 4.1
	hostje=`hostname`
	if [ -d /var ]; then
		version=4.0
	else
		version=3.x
	fi
fi

case $version in
# DEBUG MODE
#*)
#	pr_conf="cat sunmodel.input"
#	;;
6.*|5.*)
	# solaris machine
	case `uname -m` in
	sun4)
		# old sun4: no openprom.
		karch=sun4
		mach=sparc
		if [ -f /usr/ucb/hostid ]; then
			hostid=`/usr/ucb/hostid`
		else
			# sysinfo(SI_HW_SERIAL, ...) provides data
			# but must have bsd compatability software to
			# get it from command line?!
			# could compile a small program??
			hostid=xxx
		fi
		;;
	i86pc)
		# no openprom on x86

		# very few properties of value;
		# cpu-type is always "486", even on Pentium Pro!
		# bus-type "isa" even when pci present
		# machine-mfg "generic AT"
		# boot-path tells if booted from IDE or SCSI, ie;
		#	/isa/ata@1f0,0/cmdk@0,0:a

		# just show memory size;
		memsize=`/usr/sbin/prtconf -v | grep 'Memory size:' | sed 's/Memory.size:[ 	]*//'`
		echo Machine $hostje x86 $memsize
		exit 0
		;;
	*)
		# sun4c, sun4m, sun4d, sun4u, ppc?!
		pr_conf="/usr/sbin/prtconf -vp"
		;;
	esac
	;;
3.*|4.*)
	# pre 4.1 systems don't have uname;
	karch=`/usr/bin/arch -k`
	case "$karch" in
	sun4c|sun4m)
		# sun4c or sun4m sunos 4 machine. use openprom devinfo
		pr_conf="/usr/etc/devinfo -vp";;
	sun2|sun3*|sun386|sun4|Series*|S4*)
		# non-openprom machine. use hostid
		mach=`/usr/bin/mach`
		hostid=`hostid`;;
	esac
	;;
*)
	echo cant determine sunmodel
	exit 1
;;
esac

if [ "$hostid" ]; then
	# here with systems with no openprom
	# hostid mappings from hosttype v2.0
	# by John DiMarco <jdd@cdf.toronto.edu>
	case "$hostid" in
	01*)	sys='2/100';	cpu='mc68010 @ 10';;
	02*)	sys='2/50';	cpu='mc68010 @ 10';;
	04*)	sys="Solbourne $karch"; cpu="$mach";;
	11*)	sys='3/100';	cpu='mc68020 @ 16.7';;
	12*)	sys='3/50';	cpu='mc68020 @ 12.5';;
	13*)	sys='3/200';	cpu='mc68020 @ 25';;
	14*)	sys='3/110';	cpu='mc68020 @ 16.7';;
	17*)	sys='3/60';	cpu='mc68020 @ 16.7';;
	18*)	sys='3/E';	cpu='mc68020';;
	21*)	sys='4/200';	cpu='sparc @ 16.7';;
	22*)	sys='4/100';	cpu='sparc @ 14.2';;
	23*)	sys='4/300';	cpu='sparc @ 25';;
	24*)	sys='4/400';	cpu='sparc @ 33';;
	31*)	sys='386i';	cpu='i80386DX @ 15 or 25';;
	32*)	sys='486i';	cpu='i80486DX';;
	41*)	sys='3/400';	cpu='mc68030 @ 33';;
	42*)	sys='3/80';	cpu='mc68030 @ 20';;
	*)	sys="unknown $karch"; cpu="$mach";;
	esac

	# run /usr/etc/mc68881version or /usr/etc/fpuversion4 if present?
	echo Machine $hostje $sys $cpu
	exit 0
fi

# declare functions here; pre-SunOS4.1 shell did not have functions!

name=
bname=
freq=0
cpus=0
cpu= 
cpuc= 
cpuf=0
memsize=
name_freq=0
fb=
dblbuf=0
vmsize=0
depth=0
height=0
width=0
hfreq=0
vfreq=0
fbmapped=0
emulation=""
montype=""
fbext="\'cgthree\'|\'cgsix\'|\'cgtwelve\'|501-2325|501-1672|501-2253|SUNW,tcx"
fmext="montype|hfreq|vfreq|dblbuf|vmsize|depth|height|width|fbmapped|vram|tcx-8-bit|tcx-24-bit"
not="nvramrc|blit-width"

hex_to_decm()
{
	f=`hex_to_dec $1`
	f=`expr $f \/ 100000 | sed 's/\(.*\)\(.\)/\1.\2/'`
	echo $f
}

hex_to_deck()
{
	f=`hex_to_dec $1`
	f=`expr $f \/ 100 | sed 's/\(.*\)\(.\)/\1.\2/'`
	echo $f
}

hex_to_dec()
{
	hf=`echo $1 | tr '[a-z]' '[A-Z]'`
	f=` ( echo "ibase=16" ; echo $hf ) | bc`
	echo $f
}

fbuf_calc()
{
if [ ${hfreq} -eq 0 -o ${vfreq} -eq 0 ]
then
	if [ ${vfreq} -gt 0 ]
	then	
		sfreq="-${vfreq}Hz"
	else	
		sfreq=
	fi
else
	sfreq=@${hfreq}kHz-${vfreq}Hz
fi
if [ ${dblbuf} -gt 0 -a ${fbmapped} -gt 0 ]
then
	sdb="(Dubble Buffered)"
else
	sdb=
fi
if [ ${width} -gt 0 -a ${height} -gt 0 ]
then
	if [ ${depth} -gt 0 ]
	then
		sfmt=${width}x${height}x${depth}
	else
		sfmt=${width}x${height}
	fi
else
	sfmt=
fi
if [ ${vmsize} -gt 0 ]
then
	svm=${vmsize}MB
else
	svm=
fi
if [ "" != "${montype}" ]
then
	smon=Mon${montype}
else
	smon=
fi
echo  ${svm}${sdb} ${smon} ${sfmt}${sfreq}

dblbuf=0
vmsize=0
depth=0
height=0
width=0
fbmapped=0
hfreq=0
vfreq=0
montype=
}
	
export name bname freq
$pr_conf | ( egrep -v "$not" ; echo end ) | while read pr_line
do
	case $pr_line in
	Memory?size:*)
		memsize=`echo $pr_line | sed 's/Memory.size:[ 	]*//'`" "
	;;
	dblbuf:*)
		set $pr_line
		dblbuf=`hex_to_dec $2`
	;;
	vram:*)
		set $pr_line
		vmsize=`hex_to_dec $2`
	;;
	vmsize:*)
		set $pr_line
		vmsize=`hex_to_dec $2`
	;;
	tcx-8-bit:*)
		set $pr_line
		if [ $# = 1 ]
		then 
			depth=8
		else
			# don't know yet
			depth=`hex_to_dec $2`
		fi
	;;
	tcx-24-bit:*)
		set $pr_line
		if [ $# = 1 ]
		then 
			depth=24
		else
			# don't know yet
			depth=`hex_to_dec $2`
		fi
	;;
	depth:*)
		set $pr_line
		depth=`hex_to_dec $2`
	;;
	height:*)
		set $pr_line
		height=`hex_to_dec $2`
	;;
	awidth:*)
	;;
	width:*)
		set $pr_line
		width=`hex_to_dec $2`
	;;
	fbmapped:*)
		set $pr_line
		fbmapped=`hex_to_decm $2`
	;;
	hfreq:*)
		set $pr_line
		hfreq=`hex_to_deck $2`
	;;
	vfreq:*)
		set $pr_line
		vfreq=`hex_to_dec $2`
	;;
	montype:*)
		set $pr_line
		montype=`hex_to_dec $2`
	;;
	clock-frequency:*)
		if [ "$freq" = 0 ]
		then
			set $pr_line
			freq=`hex_to_decm $2`
		else
			set $pr_line
			name_freq=`hex_to_decm $2`
		fi
	;;
	banner-name:*)
		bname=`echo $pr_line | sed 's/.*banner-name:[	 ]*//'`
		#pcount=`echo $pr_line | sed 's/.*(\(.*\) X.*//'`
	;;
	emulation:*)
		set $pr_line
		emulation=$2
	;;
	*\'cgthree\'*)
		if [ "$fb" = "" ]
		then
			fb="CG3 `fbuf_calc`"
		fi
	;;
	*\'cgsix\'*)
		if [ "$fb" = "" ]
		then
			fb="GX `fbuf_calc`"
		fi
	;;
	*\'cgtwelve\'*)
		fb="GS `fbuf_calc`"
	;;
	*'SUNW,501-2253'*)
		fb="TGX-PLUS `fbuf_calc`"
	;;
	*'SUNW,501-2325'*)
		fb="TGX `fbuf_calc`"
	;;
	*'SUNW,tcx'*)
		fb="TCX `fbuf_calc`"
	;;
	*'SUNW,501-1672'*)
		fb="GX `fbuf_calc`"
	;;
	name:*)
		if [ "$name" = "" ]
		then
			name=`echo $pr_line | sed 's/.*name:[	 ]*//'`
			if [ "$bname" = "" ]
			then
				bname=$name
			fi
		fi
		case $name in
			*4/20*)
				bname="'SPARCstation SLC'"
			;;
			*4/25*)
				bname="'SPARCstation ELC'"
			;;
			*4/40*)
				bname="'SPARCstation IPC'"
			;;
			*4/50*)
				bname="'SPARCstation IPX'"
			;;
			*4/60[0-9]*)
			;;
			*4/60*)
				bname="'SPARCstation 1'"
			;;
			*4/65*)
				bname="'SPARCstation 1+'"
			;;
			*4/75*)
				bname="'SPARCstation 2'"
			;;
		esac
		fname=`echo $pr_line | sed 's/.*name:[	 ]*//'`
		case $fname in
			*Cypress,CY605*)
				cpu='Cypress,CY605'
				cpus=`expr $cpus + 1`
				if [ $name_freq = 0 ]
				then
					#SPARCsystem 600MP (4 X CY605)
					# no freq with in cpu part 
					name_freq=$freq
				fi
				cpuf=$name_freq
				cpuc= 
			;;
			*TI,TMS390Z55*)
				cpu="Texas Instruments TMS390Z55 1MB S.Cache"
				cpus=`expr $cpus + 1`
				cpuf=$name_freq
				cpuc=1
			;;
			*TI,TMS390Z50*)
				cpu="Texas Instruments TMS390Z50"
				cpus=`expr $cpus + 1`
				cpuf=$name_freq
				cpuc=
			;;
			*TI,TMS390S10*)
				cpu="Texas Instruments TMS390S10 (MicroSparc)"
				cpus=`expr $cpus + 1`
				cpuf=$name_freq
				cpuc=
			;;
			*SUNW,UltraSPARC*)
				cpu="UltraSPARC"
				cpus=`expr $cpus + 1`
				cpuf=$name_freq
				cpuc=
			;;
			*Ross,RT625*)
				cpu="Ross,RT625"
				cpus=`expr $cpus + 1`
				if [ $name_freq = 0 ]
				then
					#SPARCsystem 600MP (4 X RT625)
					# no freq with in cpu part 
					name_freq=$freq
				fi
				cpuf=$name_freq
				cpuc=
			;;
		esac
		save_freq=$name_freq
		name_freq=0
	;;
	device_type:*'cpu'*)
		if [ $cpuf = 0 ]
		then
			cpu="No Name,Send prtconf -vp output to janw@wins.uva.nl"
		fi
	;;
	end)
		if [ $cpuf = 0 ]
		then 
			cpuf=$freq
		fi
		if [ `expr "$bname" : "'.*39.Z.*'"` != 0 -a `expr "$bname" : ".*[21]000.*"` = 0 ]
		then
		case $cpuf in
			33.0|30.0)
				if [ "$cpus" != 1 ]
				then
					bname="$bname '(Model 2$cpus)'"
				else
					bname="$bname '(Model 20)'"
				fi
				freq=$cpuf
				;;
			36.0)
				if [ "$cpus" != 1 ]
				then
					bname="$bname '(Model 3$cpus)'"
				else
					bname="$bname '(Model 30)'"
				fi
				freq=$cpuf
				;;
			40.3)
				if [ "$cpus" != 1 ]
				then
					bname="$bname '(Model 4${cpuc}${cpus})'"
				else
					bname="$bname '(Model 41)'"
				fi
				freq=$cpuf
				;;
			45.0|50.0)
				if [ "$cpus" != 1 ]
				then
					bname="$bname '(Model 5${cpuc}${cpus})'"
				else
					bname="$bname '(Model 51)'"
				fi
				freq=$cpuf
				;;
			60.*)
				if [ "$cpus" != 1 ]
				then
					bname="$bname '(Model 6${cpuc}${cpus})'"
				else
					bname="$bname '(Model 61)'"
				fi
				freq=$cpuf
				;;
			*)
				if [ "$cpus" != 1 ]
				then
					bname="$bname '(Model X${cpuc}${cpus})'"
				fi
				freq=$cpuf
				;;
		esac
		else
			if [ $cpus -gt 1 ]
			then
				bname="$bname ($cpus X $cpu cpus)"
			fi
		fi
		echo Machine $hostje: $bname @ $cpuf MHz $memsize$fb 
	;;
	#*)
	#	echo $pr_line "?????"
	#;;
	esac
done