diff --git a/feature/gnmi/otg_tests/gnmi_resiliency_test/README.md b/feature/gnmi/otg_tests/gnmi_resiliency_test/README.md
new file mode 100644
index 00000000000..f27d60eabe3
--- /dev/null
+++ b/feature/gnmi/otg_tests/gnmi_resiliency_test/README.md
@@ -0,0 +1,69 @@
+# gNMI-1.7: gNMI Resiliency Test
+
+## Summary
+
+- Generate High gNMI Load (get)
+- Perform 1 LC OIR
+- While LC is rebooting perform gNMI replace
+- Operations should succeed once LC OIR completes
+
+## Testbed type
+
+*   https://github.com/openconfig/featureprofiles/blob/main/topologies/atedut_2.testbed
+
+## Procedure
+
+#### Initial Setup:
+
+*   Connect DUT port-1, 2 to ATE port-1, 2
+*   Configure IPv4/IPv6 addresses on the ports
+
+### gNMI-1.7.1: Generate High gNMI Load
+
+*   Perform a `gNMI Get` at the root level every 60 seconds or less
+*   Set up gNMI subscribe with `SAMPLE` mode and sample interval of 10 second for interface counters
+
+### gNMI-1.7.2: Trigger Line Card Reset
+
+*   While the gNMI load is active, trigger a reset of one of the line cards
+
+### gNMI-1.7.3: Execute gNMI Set (Replace) Operation
+
+*   While the line cards are initializing, perform a `gNMI Set` operation that modifies or replaces a significant portion of the configuration
+
+### gNMI-1.7.4: Verification
+
+*   Validate if the `gNMI Set` request is successful or not
+*   Validate that the `gNMI get` at the root level works through out the test
+*   Validate that the `gNMI subscribe` works while the LC is operational
+
+#### Canonical OC
+```json
+{
+}
+```
+
+## Protocol/RPC Parameter Coverage
+
+* gNMI
+  * Get
+  * Set
+
+## Required DUT platform
+
+* FFF
+
+## OpenConfig Path and RPC Coverage
+
+The below yaml defines the OC paths intended to be covered by this test. OC
+paths used for test setup are not listed here.
+
+```yaml 
+paths:
+
+
+rpcs:
+  gnmi:
+    gNMI.Set:
+    gNMI.Subscribe:
+```