diff --git a/feature/system/system_base_test/tests/reboot_test/README.md b/feature/system/system_base_test/tests/reboot_test/README.md
new file mode 100644
index 00000000000..fa1f35588ca
--- /dev/null
+++ b/feature/system/system_base_test/tests/reboot_test/README.md
@@ -0,0 +1,147 @@
+# System-2.1: DUT Reboot Test
+
+## Summary
+
+- Configure BGP, IS-IS and redistribution
+- Validate control-plane and data-plane post reboot
+- Validate P4RT, gNMI, SHH connectivity post reboot
+
+## Testbed type
+
+*   https://github.com/openconfig/featureprofiles/blob/main/topologies/atedut_2.testbed
+
+## Procedure
+
+### Test environment setup:
+
+*   Connect DUT port-1, 2 to ATE port-1, 2
+*   Configure IPv4/IPv6 addresses on the ports
+*   Configure IPv4 and IPv6 IS-IS L2 adjacency between ATE port-1 and DUT port-1
+*   Configure IPv4 and IPv6 eBGP between DUT Port-2 and ATE Port-2
+*   Advertise a few IPv4/v6 BGP routes from ATE to DUT through the BGP session
+*   Configure redistribution of the BGP prefixes to IS-IS on the DUT
+
+### System-2.1.1 - Pre Reboot Validation
+---
+
+#### Validate SSH connectivity
+*   Verify SSH connectivity to the device works
+
+#### Validate P4RT connectivity
+*   Configure P4RT id and node-id (device_id) with port-1 interface
+    *  Linecard `device_id = 111`
+*   Using P4RT Read RPC send a ReadRequest for port-1 counters
+*   Ensure a ReadResponse is received
+
+#### Validate Traffic Forwarding
+*   Initiate traffic from ATE port-1 to the DUT and destined towards the BGP redistributed routes
+*   Validate that the traffic is received on ATE port-2
+
+#### Canonical OC
+```json
+{
+  "network-instances": {
+    "network-instance": [
+      {
+        "config": {
+          "name": "DEFAULT"
+        },
+        "name": "DEFAULT",
+        "protocols": {
+          "protocol": [
+            {
+              "bgp": {
+                "neighbors": {
+                  "neighbor": [
+                    {
+                      "config": {
+                        "neighbor-address": "192.0.2.6"
+                      },
+                      "neighbor-address": "192.0.2.6",
+                      "timers": {
+                        "config": {
+                          "hold-time": 30,
+                          "keepalive-interval": 10
+                        }
+                      }
+                    }
+                  ]
+                },
+                "peer-groups": {
+                  "peer-group": [
+                    {
+                      "config": {
+                        "peer-group-name": "peer_group"
+                      },
+                      "peer-group-name": "peer_group",
+                      "timers": {
+                        "config": {
+                          "hold-time": 30,
+                          "keepalive-interval": 10
+                        }
+                      }
+                    }
+                  ]
+                }
+              },
+              "config": {
+                "identifier": "BGP",
+                "name": "BGP"
+              },
+              "identifier": "BGP",
+              "name": "BGP"
+            }
+          ]
+        }
+      }
+    ]
+  }
+}
+```
+
+### System-2.1.2 - Post Reboot Validation
+---
+#### Reboot the DUT
+*   Reboot the DUT and wait for it to come back up
+
+#### Validate SSH connectivity
+*   Verify SSH connectivity to the device works
+
+#### Validate P4RT connectivity
+*   Configure P4RT id and node-id (device_id) with port-1 interface
+    *  Linecard `device_id = 111`
+*   Using P4RT Read RPC send a ReadRequest for port-1 counters
+*   Ensure a ReadResponse is received
+
+#### Validate Traffic Forwarding
+*   Initiate traffic from ATE port-1 to the DUT and destined towards the BGP redistributed routes
+*   Validate that the traffic is received on ATE port-2
+
+
+## Protocol/RPC Parameter Coverage
+
+* gNMI
+  * Get
+  * Set
+
+## Required DUT platform
+
+* MFF
+
+## OpenConfig Path and RPC Coverage
+
+The below yaml defines the OC paths intended to be covered by this test. OC
+paths used for test setup are not listed here.
+
+```yaml 
+paths:
+  /network-instances/network-instance/table-connections/table-connection/config/address-family:
+  /network-instances/network-instance/table-connections/table-connection/config/src-protocol:
+  /network-instances/network-instance/table-connections/table-connection/config/dst-protocol:
+
+
+rpcs:
+  gnmi:
+    gNMI.Set:
+    gNMI.Subscribe:
+```
\ No newline at end of file
diff --git a/feature/system/system_base_test/tests/reboot_test/metadata.textproto b/feature/system/system_base_test/tests/reboot_test/metadata.textproto
new file mode 100644
index 00000000000..4e81719ea19
--- /dev/null
+++ b/feature/system/system_base_test/tests/reboot_test/metadata.textproto
@@ -0,0 +1,7 @@
+# proto-file: github.com/openconfig/featureprofiles/proto/metadata.proto
+# proto-message: Metadata
+
+uuid:  "e8222152-dc41-4398-92e6-2f9dbc8d3026"
+plan_id:  "System-2.1"
+description:  "DUT Reboot Test"
+testbed:  TESTBED_DUT_ATE_2LINKS