diff --git a/doc/configuration.rst b/doc/configuration.rst
index cb7e4c520..b626764e7 100644
--- a/doc/configuration.rst
+++ b/doc/configuration.rst
@@ -229,6 +229,11 @@ Currently available are:
   <https://github.com/labgrid-project/labgrid/blob/master/labgrid/driver/power/rest.py>`__
   for details.
 
+``secomp``
+  Controls *Secomp* PDUs via HTTP. This is a 19" Rackmount PDU sold and
+  rebranded under various names e.g. VALUE IP, Argus, Intellinet, or
+  LogiLink 8p01.
+
 ``sentry``
   Controls *Sentry PDUs* via SNMP using Sentry3-MIB.
   It was tested on *CW-24VDD* and *4805-XLS-16*.
diff --git a/labgrid/driver/power/secomp.py b/labgrid/driver/power/secomp.py
new file mode 100644
index 000000000..ba6fb467f
--- /dev/null
+++ b/labgrid/driver/power/secomp.py
@@ -0,0 +1,69 @@
+"""
+This driver was tested on the model: LogiLink PDU8P01
+but should be working on all similar devices implementing this SECOMP chip.
+
+The driver is pretty simply and generic, it requires http(s), needs provided
+authentication and uses a '0' for on.
+"""
+import requests
+import xml.etree.ElementTree as ET
+from urllib.parse import urlparse
+from ..exception import ExecutionError
+
+def _send_request(host, url_path, params=None):
+    """
+    Helper to handle host string which might have credentials stripped
+    or scheme changed
+    """
+    if not host.startswith('http'):
+        host = f"http://{host}"
+    parsed = urlparse(host)
+
+    base_url = f"{parsed.scheme}://{parsed.netloc.split('@')[-1]}"
+    full_url = f"{base_url}/{url_path}"
+
+    auth = None
+    if parsed.username and parsed.password:
+        auth = (parsed.username, parsed.password)
+
+    try:
+        response = requests.get(full_url, params=params, auth=auth, timeout=10)
+        if response.status_code == 401:
+            raise ExecutionError(f"Secomp: Authentication failed (401) for {full_url}. Check YAML credentials.")
+        response.raise_for_status()
+        return response
+    except requests.exceptions.RequestException as e:
+        raise ExecutionError(f"Secomp: HTTP Request failed: {e}")
+
+def power_set(host, port, index, value):
+    """
+    host: the IP or URL
+    port: the TCP port (usually 80)
+    index: the outlet number (1-8)
+    value: True (ON) or False (OFF)
+    """
+    # Secomp 0816 logic: 0 is ON, 1 is OFF
+    action_code = 0 if value else 1
+    params = {
+        f"outlet{int(index)-1}": 1,
+        "op": action_code,
+        "submit": "Apply"
+    }
+
+    try:
+        response = _send_request(host, "control_outlet.htm", params=params)
+        if "Apply" not in response.text:
+            raise ExecutionError(f"Secomp: PDU failed to set port {index}")
+    except requests.exceptions.RequestException as e:
+        raise ExecutionError(f"Secomp: HTTP Request failed: {e}")
+
+def power_get(host, port, index):
+    response = _send_request(host, "status.xml")
+    try:
+        xml = ET.fromstring(response.content)
+        outlet_node = xml.find(f'outletStat{int(index)-1}')
+        if outlet_node is None:
+            raise ExecutionError(f"Secomp: Could not find status for port {index}")
+        return outlet_node.text.lower() == "on"
+    except Exception as e:
+        raise ExecutionError(f"Secomp: Failed to get status: {e}")