Failed to run for P2P bandwidth Example

[JerryW35]

Hi,
According to the VITIS ACCEL EXAMPLE Doc, I'm tring to test the code of P2P bandwidth example for my SmartSSD. However, I got a error when I run the command
./p2p_bandwidth -x ./build_dir.hw.xilinx_u2_gen3x4_xdma_gc_2_202110_1/bandwidth.xclbin -f ./data/sample.txt -p /dev/nvme0n1

the whole output of terminal is below:

---

WARNING: Ignoring -f option when -p options is set. -p has high precedence over -f.
Found Platform
Platform Name: Xilinx
INFO: Reading ./build_dir.hw.xilinx_u2_gen3x4_xdma_gc_2_202110_1/bandwidth.xclbin
Loading: './build_dir.hw.xilinx_u2_gen3x4_xdma_gc_2_202110_1/bandwidth.xclbin'
Trying to program device[0]: xilinx_u2_gen3x4_xdma_gc_base_2

Message from syslogd@iad0-SYS-220U-TNR at Aug 10 16:00:27 ...
kernel:[53262.306491] watchdog: BUG: soft lockup - CPU#81 stuck for 22s! [kworker/u224:8:1313]

---

Before executing the application, I run make all PLATFORM=xilinx_u2_gen3x4_xdma_gc_2_202110_1 TARGET=hw. There's no error in this process.
By the way, the hw_emu and sw_emu are all passed.

Here is my environment config:
OS: Ubuntu 20.04.6 LTS (GNU/Linux 5.4.0-155-generic x86_64)
XILINX XRT: version 2022.1
platform: xilinx_u2_gen3x4_xdma_gc_2_202110_1
device: SmartSSD

I passed the validation mentioned in the UG1382v1.3 by running sudo xbutil validate -d <bdf>

What should I do to run the application? Thanks!